...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

Walker Turner 6in Jointer on Original Base - New Blades and tuned - $375 (Millbury)

‹ image 1 of 20 ›
Walker Turner 6in Jointer on Original Base - New Blades and tuned 1
Walker Turner 6in Jointer on Original Base - New Blades and tuned 1 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 2 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 3 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 4 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 5 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 6 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 7 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 8 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 9 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 10 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 11 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 12 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 13 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 14 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 15 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 16 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 17 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 18 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 19 thumbnailWalker Turner 6in Jointer on Original Base - New Blades and tuned 20 thumbnail

google map

QR Code Link to This Post

Hello,
I have a restored Walker Turner 6" jointer for sale. It is from 1940s to early 50s. This is a single phase unit with an original Walker Turner motor so it can be plugged in at any shop. The electricals have been replaced so no bad wires to tend to. The cutter head has new knives and it is fully tuned an ready to work. It also includes the original blade guard and the original dust door setup. The interior is super clean and the infeed/outfeed tables move as they should. All the knobs are original. The fence has also been cleaned/lubed and is ready to go. I have the old knives if you want them.

I have a video of it running so you can see it before you even come by.

As I mentioned, it has been functionally restored. The paint is also solid on this unit though there is a tint difference between the base and the jointer itself. All the original components are there (except the switch).

If you would like to take a look please drop me a note and we can set something up.

Thanks!

post id: 7934327829

posted:

updated:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.