6-pinion planetary input early cut (1987-1994) gearset for New Process / New Venture transfer cases
Terrific upgrade from the common 3-pin for Jeep YJ XJ Dodge NP231 242 249 models, especially when opening up on a transfer case to swap input gears and upgrading to 23 spline, or pairing with wider 1.25" chain, or heavy duty output shaft such as slip yoke eliminator (SYE), or building a transfer case doubler
Note, look closely at the pictures of the teeth profile of the gears, in particular how the tops of the teeth are flat and blocky, as this is an early cut gearset that transitioned in mid-1994. It MUST be paired with the matching early cut annulus (ring) gear which is pressed into the front transfer case half.
Instead of attempting to extract and swap an annulus ring gear, it's recommended to instead source a front case half with the matching ring gear already installed. (94+ late cut gears are visibly more pointed, sharp, and angled tops on the gear teeth)
Great condition, has been ultrasonically cleaned and lubricated, gears spin freely as they should.
Includes preassembled thrust retaining plate and snap ring