Milwaukee 4270-20 Compact Electromagnetic Magnetic Drill Press 120V 9A Tested
In Travel case
Lightly used
Comes with: 3-Annular Cutter ¾, ⅞, 1”
For remote drilling in metal, the 4270-20 is a great choice. It can drill up to 1 1/2in. diameter holes through 2in. thick steel with annular cutters, or 1/2in. diameter holes 4 1/4in. deep with twist drill bits. The tool is setup to accept standard 3/4in. Weldon shank cutters. USA.
Powerful 9.0 Amp motor
The strong two-coil magnet provides 2300 lbs. of deadlift force on 1in. thick steel
Simple two-button control panel is located on the back, away from feed handle obstruction
Feed handle can be conveniently relocated to the opposite side without the use of tools
High-strength two-coil magnet
750 lbs. drill point pressure
6.6in. drill travel
8ft. fixed cord