2004 4Runner V8 transfer case - $1,400 (Redondo Beach)
‹image 1 of 14›
make / manufacturer:Toyota
QR Code Link to This Post
Complete Transfer Case Assembly from 2004 Toyota 4Runner (2UZ-FE engine). The only part that this transfer case does not have is the little metal protection plate that goes over part of the actuator. You will see it in the photos, but the new TC doesn’t come with one, so I removed it and put on my new one. Be sure to do the same with yours.
I bought this 4Runner new in 2004 and it has always been a California car except for living in Corvallis, OR for 18 months. Always well-maintained, not abused, minor upgrades (2.5” lift/32” tires).
Transfer case was removed Sept. 2026 at 146,325 miles, removed for replacement with a new one.
The TC has never failed and has had zero problems other than leaking from what is likely the well-known leaking actuator rod seals issue. I was going to have the repairs made and I bought the parts for it (four spring washers for the rods (aftermarket) and two O-rings (Toyota OEM) and the Toyota OEM FIPG but decided it was beyond my ability so instead bought a new TC case and had it professionally swapped out. I tested High / Low and Lock the day before replacing this TC and everything continued to work as designed.
While this TC was experiencing its slow leak, I routinely added new gear oil to it every couple thousand miles / 2-3 months. I used a graduated plastic squeeze bottle to fill it with, so that I could precisely measure the amount of gear oil I was replacing. The transfer case only got below 90% one time (86.6%) and was routinely above 92% before I added new gear oil. I used Mobil 1 Full synthetic 75-90 gear oil.
Part # for the new transfer case that replaced it is 36100-6D401 (“Transfer Assy”). Per Toyota, it is the direct replacement for 36100-6D400.
I didn’t feel like spending $1,500 or whatever on a questionable part from car-part dot com or wherever, where I had zero history of the part. Hopefully all the info I provided will make whomever buys this comfortable that they know the full history on it.
Price includes the four spring washers and the Toyota two OEM O-ring (yes, I bought extras just in case), and the Toyota FIPG if you want to DIY. The case was drained of gear oil prior to being removed, and it now sits in the Toyota “pallet” corrugated box that the new TC came in.