loading
reading
writing
saving
searching
Bike stuff - $1
QR Code Link to This Post
- Track cranks 144bcd 170mm 47T. Chainring mostly good shape but has some burrs on the teeth. Came off a Felt Brougham. $20
- Profile Design AirStryke 2000 aerobars. For 26mm handlebars. $40
- Sugino VP crank arms. 110 BCD double 170mm. $30
Stems
- Salsa 1 1/8" threadless 26mm clamp. 130mm reach and hella rise. $20
- Easton 1 1/8" threadless 26mm clamp. 110mm reach 6 degree rise. $20
- Kona 1 1/8" threadless 26mm clamp. 110mm reach 10ish degree rise. $20
- adjustible 1 1/8" threadless 31.8 clamp. 105mm reach 10-50 degree rise. $10
- SR Sakae 1" threaded 25.4mm clamp. 80mm reach, lots of rise. Has integrated guide for canti/u-brake/centerpull brake cable. $30
- Shimano MX30 freewheel. 16T, smooth ratchet. No sharktoothing but there are burrs on a few of the teeth. $10
- Campagnolo 1" headset. I believe this is a 1988-1994 Athena groupset. 26.4mm crown race and English thread. Crown race has some dings from getting it off my fixie fork. Aluminum locknut is non-original. This thing is smoooooooooooooooooth. $40
- Deore LX BR-M550 cantilever brakes F+R. Everything's there but the straddle cables. $30
- Tektro standard reach dual pivot brake. Shop wear but never used. Recessed bolt for front wheel. $20
- Tektro v-brake, one wheel. $5
- Surly Steamroller fork. Like new in box. Steerer never cut. Star nut not installed but I will include a new star nut with installer tool. A crown race was mounted but removed. I peeled the legalese decal off. Bought this before I realized that I could adapt my old fixie fork from wrecked frame to my new-to-me fixie frame with a bad fork using a Neco 1" fork to 1 1/8" headtube conversion headset, which is a thing that is real. My oops your gain. $80.
- Origin-8 Tiki (moustache) bars. 51cm width. $20
- Sensah RX-10 shifters, 10sp Shimano Dyna-sys compatible. Surprisingly not bad for Temu gear (though the matching derailleur was terrible). Dual action on the up-shift. Can down-shift up to 5 cogs in one sweep. $10
- Suntour Barcon power ratchet thumb shifters. Raleigh branded on the grips. Functional and complete, other than that the locknut which always falls off, has indeed fallen off both shifters. Ultrasonic cleaned and lubed. $30.
- Origin-8 inline bartop brake levers. $10
- Topo bar ends. $5
- Shimano Exage brake levers. No hoods. $5
STI levers. All are first gen 7/8 speed. All have been COMPLETELY disassembled, ultrasonic cleaned, reassembled, lubed with silicone spray lube, and shift fine. Hoods are original and some have small tears. You can get new hoods from https://www.kotm.bike/products
- 105 left+right 8 speed double. $100
- 105 left triple. Missing clamp. $40
- RSX left+right 7 speed triple. $90
- RSX left+right 8 speed triple. $90
- RX100 right 8 speed. Missing clamp. $40
- RSX left triple. $40