'18 foot light Whitehall type pulling boat, painted and varnished, 4 seats, 2 sets rowlock sockets, all-around rope bumper'. Is how the builder, William H. Krase, of Mendocino, Ca.,described this beauty back in 1987 in his listing catalog. Please google Mr. Krase, he was quite an accompIished builder of boats and musical instruments in his spare time besides being a research engineer specializing in thermodynamics and propulsion for the RAND Corporation.
I purchased this Whitehall in 2017 from the original owner and stripped the outer hull down to bare wood, then double coated the hull with epoxy, several coats of sanding primer, and finally the top coats. The brightwork was stripped, double coated in epoxy, then ten coats of Systemthree WR-LPU Clear Gloss. Re-bedded the D-shaped bronze bottom rub strip in 3M 5200. Couldn't decide if I like the top stake blue or white, thus the duel colored top stake, have the white paint if you want it all white. This work should keep her maintenance free for a very long time.
This Whitehall was ordered with all options at the time: gratings, seat back, floorboards, spoon oars with leathers and buttons, decorations, rudder with yoke by the original owner. I replaced the original trailer with a much better galvanized one.
I've trailered this rig to many Sierra lakes with two kayaks and our camping gear fitting nicely in the boat with plenty of room in it left over. Always receiving many compliments about how beautiful wooden Whitehalls look, now it's your turn.