loading
reading
writing
saving
searching
Custom-made 3-level work table - $700 (Madison near-west)
658 Orchard Dr near Odana Rd
QR Code Link to This Post
Custom-made 3-level work table, 4 feet by 8 feet, EXCELLENT condition, with four spacious drawers along one side and a long shelf along the other side. Good for general projects, woodworking, arts & crafts, picture framing, or whatever else you might want to use it for.
The dimensions of the table top are 8 feet 1.5 inches long by 4 feet 1.5 inches wide, and the height of the tabletop is 35.5 inches above the floor.
The large lower horizontal surface is 91 inches long by 40 inches wide and is seven inches above the floor.
One long side of the table has four identical rolling drawers, and the internal dimensions of each drawer are 19 inches wide by 17 inches deep by five inches high, for a total storage capacity of 0.93 cubic feet (1,615 cubic inches) per drawer.
The other long side of the table has a large shelf that is 11.5 inches below the top surface of the table and is 24 inches above the floor. The internal dimensions of this shelf are 88 inches long by 19 inches deep by 10 inches high.
This table is made of solid birch and birch plywood, with no stain or varnish, and its total weight, estimated by the person who made it, is 150 pounds The maker transported it, in sections, to my home in his pickup truck, and he assembled it in its current location. The only way for us to remove it from my home will be to disassemble it first, using common tools. You will reassemble it in your preferred location, again using common tools, and I am willing to help with that, if you wish (your option), if your location is within a reasonable distance. After we disassemble the table, the largest piece (that your transport vehicle will have to be large enough to accommodate) will be the TOP, which is 8' 1.5” x 4' 1.5” x 1.5” (97.5 inches x 49.5 inches x 1.5 inches). I do NOT have a vehicle that is large enough to transport all sections of this table, so you will have to use your own vehicle.
The table was made by a woodworker/furniture maker named Chris Gleason, who used to run his business Gleason Tableworks at 1976 Atwood Ave (at Schenk's Corner) in Madison. He now lives in a different state, and you can see MANY other examples of his work at his active website:
www.chrisgleasonwoodworker.com
I'm KEEPING the Irwin model 4935507 Light Duty Workshop Vise that is pictured on the right-near corner of the table, but have included it in the photos for reference, in case you want to buy this model for yourself, use one you already have, choose to have no vise at all, or use a different vise with the same bolt spacing, etc. The bolt spacing that I drilled into the table top is a perfect square, 3.5” bolt-center to bolt-center.
$700.00, cash preferred, but will also accept Apple Cash, Venmo, and Paypal. No personal checks, no exceptions. This is a finely-crafted, versatile piece of woodworking in EXCELLENT condition, and I will NOT be selling it for a bargain garage sale price. Serious inquiries only. If I don't answer your call immediately, I will reply to your voicemail as soon as possible. Texting is OK, but I will not consider a reply to be serious (or REAL) until I hear your voice .... thanks! :)
If this ad is still posted, then this item is still available. I will delete the ad immediately when it is sold. Replies asking if the item is still available will be ignored and blocked.