loading
reading
writing
saving
searching
High-precision220V Button Tensile Testing Machine 500N 238029 - $3,149 (hayward / castro valley)
QR Code Link to This Post
-
Product Overview
The button tensile testing machine employs high-precision sensors and mechanical transmission structures, featuring real-time monitoring of both force and displacement parameters. Its key characteristics include high testing accuracy, an intuitive user interface, and support for customized fixtures. Equipped with multiple fixtures, this machine can perform tensile tests on common buttons such as jeans buttons and snap fasteners. It is widely used in factories, universities, research institutions, technical supervision departments, quality inspection stations, and similar organizations.
Product Parameters
Specification 500N
Force Value Resolution 0.01N
Displacement Resolution 0. 01mm
Force Measurement Accuracy <±1%
Test Speed 10-500mm/min
Test Stroke 35.4"/900mm (without fixture);
29.5"/750mm (with standard fixture installed)
Tensile Strength Unit MPA. KPA etc.
Force Unit Kgf.N.lbf.gf
Variant Units mm.cm.in
Printer All series come with a small printer
Language English, Chinese
Fixture Standard configuration includes 6 fixtures
Machine Weight Approximately 70 kg (154lbs)
Power Supply AC220V
Product Structure Analysis
1. Upper and Lower Fixtures
The upper fixture features a flexible, interchangeable design that quickly adapts to different fixture specifications. The lower fixture's rubber components distribute force evenly, ensuring secure clamping and uniform stress distribution during tensile testing. This significantly enhances the accuracy of test data and operational efficiency.
2. Limit Switch
The limit switches prevent fixtures from colliding during testing by setting upper and lower travel endpoints. Triggering the limit switch provides mechanical protection against damage to sensors or fixtures.
3. Printer
The built-in micro printer can print curves and data. Test data from the touchscreen can be printed through this printer. Data tested on a computer cannot be printed on this printer.
4. Safe & Complete Interfaces
The device is equipped with comprehensive interfaces and safety components such as a power interface, communication interface, power switch, and fuse. Its design is well-considered, ensuring safe and convenient operation.
5. Extra Accessories
The standard set of six fixtures ensures adaptability for testing various customer products. The equipment supports flexible fixture replacement and can be customized as needed.
Operating Method
Connect the 220V power cord, rotate the red emergency stop switch on the side, and turn on the red switch at the rear of the machine. The display will illuminate, and the machine will directly enter the test interface upon startup.
1. “Up” and “Left” buttons: Control upward/leftward movement of the machine.
2. “Down” and “Right” buttons: Control downward/rightward movement of the machine.
3. “Test” button: Execute the test.
4. “Stop” button: Press during movement to halt the machine; press during testing to terminate the test.
5. “Reset” button: Resets force, peak force, displacement, deformation, and other values to zero.
6. “Return” Button: Returns the machine to the position it was in when the “Reset” button was last pressed. During the return process, you can press the “Stop” button at any time to halt the machine. Pressing the “Return” button again will resume the return process. Alternatively, press the “Zero” button to stop the machine. However, after stopping with the “Zero” button, pressing the “Return” button will not initiate the return process again. This is because the program determines that the return operation is complete when the “Zero” button is pressed, causing the machine to stop without returning.
7. “Print” button: Prints the current maximum force and deformation values.
8. “Take Point” button: Press during testing to execute manual data acquisition.
9. “View” button: Accesses the test result review interface.
10. “Settings” button: Enters the pre-test interface for configuring specimen information and test methods.
11. “Force,” “Maximum Force,” “Displacement,” “Deformation” buttons: Clicking any of these four buttons allows selection of the button text to toggle the real-time display of desired parameters.
Item included: 238029
1*220V Button Tensile Testing Machine 500N