• All stainless steel internal tubing & compression fittings provide higher ultimate vacuum, holds vacuum 10 times longer, and require minimum maintenance.
• Oil-filled mechanical vacuum gauge provides more accurate reading, longer gauge life and minimizes shipping damage.
• All stainless steel vacuum and vent valves give you cleaner connection, more accurate control and long term durability.
•5 sided pad heating technology and aluminum shelves provide excellent temperature uniformity and faster heating rates (25% faster in our lab test).
• Adjustable gas back fill capability with needle valve and vent port.
• LCD low proportional gain temperature controllers keep your oven temperature within +/- 1°F accuracy, in either °F or °C
• Best choice for the curing and converting of oil extracts. With a deep vacuum level, they can operate at temperatures which allow the degassing/purging process to occur rapidly, thus increasing productivity and allowing for the production of superior quality products with minimal processing time.
• Dual layer observation window with 1/2" tempered safety glass.
• 3" thermal insulation prevents heat loss and minimizes the enclosure's outer surface temperature.
• Easy-to-clean stainless steel interior for exceptional durability and ease of maintenance.
• Built-in alarm alerts you when the oven has been shut down by safety circuitry due to out of range temperature.
Electrical Requirements
110V +/-10% 50/60Hz 1-PH 13.6A, 1500 watts
or
220V +/-10% 50/60Hz 1-PH 6.8A, 1500 watts
Chamber
Size: 16.5 x 14.5 x 14"
Material: Stainless steel
Capacity: 1.9 cubic foot
Temperature Control
Controller: 3rd gen low proportional gain, microcomputer PID controlled with LCD display
Range: ambient to 480°F
Display units: Fahrenheit or Celsius
Accuracy: +/- 1°F
Uniformity: +/- 6% of setpoint
Dwelling timer range: 1 to 9999 minutes
Warm-up time to 100°F: 45 minutes
Vacuum
Ultimate vacuum level: better than 500 microns/millitorrs
(may vary based on your altitude)
Mechanical gauge range: 0 to 30 inch mercury
Vacuum port: KF25 flange x 1
Vent port: 3/8" hose barb
Weight
Unit: 140 Lbs
Dimensions (WxDxH)
Unit: 28 x 20 x 21.75" With handle and vacuum port: 28 x 23 x 21.75"
Shipping: 32 x 28 x 29"
Shelves
Included with oven purchase: 5 aluminum slide-in shelves
Size: 16 x 14.25 inches
Total area: 228 x 10 = 16 sq ft or 2,280 inch2
Distance between shelves: one inch
Door Gasket Material
Silicone
Observation Window
1/2" tempered safety glass
Safety
Built-in circuit breaker, controller overheat protection, secondary over-temp protection dial
In-Door Lights
White LED
Compliance
UL (E482564), CSA, CE