loading
reading
writing
saving
searching
Smart and cute
QR Code Link to This Post
Approx. 30 LF of 2/0 gage seu aluminum service entrance cable in good used condition. Pulled from a working 150-amp residential installation. Compare to new at $7 per foot.
Used cable sold as-is without warranty. Buyer responsible for proper installation per electrical code.
2 ft x 2 ft skylight. Insulated glass. Wood interior. Built-in mounting flange. Works with shingle or flat roof. Well-designed and built with internal drainage system. Excellent condition. Just needs cleaning. Has some old roof cement on it that can be cleaned off. It was on a rowhouse low slope roof and it NEVER leaked.
Dimensions:
Inside metal flange to metal flange: 23 inches
Inside wood to wood: 20 3/4 inches (clear opening between drywall when finished)
Lithonia Lighting wet-location rated recessed fixture with 5” can (non-IC) and hazy glass lens. Takes up to a 50 watt PAR 30’or can use LED bulb. See pics for details. Overall can diameter (hole size) 6”. Can depth 5 3/4”. In excellent used condition, pulled from a working installation. Some drywall joint compound residue along edge of can, which is not visible behind the trim.
Prehung flat panel (hollow core lauan) used door. Size 32”x 80”. Hinges/ doorswing at right looking into the room. Normal door set up and in very good condition. Painted on the inswing side. $50 firm.
24x80 Bifold door. New condition, plastic wrap was removed before I realized it was the wrong size, never installed. Two full louvered 12” wide door panels joined by factory installed hinges. Installation hardware is included.
ONE KEYENCE RB-1200 3-D VISION GUIDED ROBOTICS CAMERA. This is a 3-D vision system used in robotics automation. It's frequently used in bin-picking, automotive assembly, and other industry automation.
It comes with everything shown in the photos. We will guarantee that this is fully functional upon receipt. Because we aren't with Keyence, or a dealer, any service contracts, training, or ongoing support will need to be arranged with Keyence or an integrator.
2018 Vanguard VK300D UV Flatbed Printer
This printer is about 19’ x 9’ and weights about 3400 pounds.
Print area is 5’ x 10’.
We currently use it to print on corrugated plastic for yard signs but it can print on a variety of different materials including wood, metal, fabric etc.
There are currently 4 CMYK print heads installed and running but it has the capacity for 8 print heads with the white option. All of the print heads are about a year old.