loading
reading
writing
saving
searching
VendingMiser VM170 (New) Easy-Install VendingMiser - $110 (Willowbrook, Ca.)
Elsegundo Blvd. near Central Ave.
condition:
new
make / manufacturer:
USA Technologies. Inc
model name / number:
VM170
size / dimensions:
4.5"W x 1.75"H x 3.25"D
QR Code Link to This Post
Retail Price: $189.95
Your Price: $129.00 OBO (Or Best Offer)
More available if needed.
Description: Model: VM170
Vending machines typically run 24 hours a day, whether anyone is likely to use the machine or not. By powering down the machine when it is not needed, energy consumption can be significantly reduced. The Vending-Miser EZ uses a Passive Infrared Sensor (PIR) to power down a refrigerated vending machine when no one has been within 25 feet of the machine for 15 minutes. Then it monitors the room’s temperature and automatically re-powers the cooling system at one to three-hour intervals, dynamically adjusted based on the ambient temperature to ensure that the product stays cold.
To reduce wear and tear on the machine, Vending-Miser EZ’s micro-controller will never power down the machine while the compressor is running, eliminating compressor short-cycling. In addition, when the machine is powered up, the cooling cycle is allowed to finish before again powering down.
Vending-Miser EZ is a simple external plug-and-play product, being able to be installed directly onto the vending machine with Velcro. Included is one Vending-Miser EZ preassembled for installation.
To control multiple machines (up to four), a Vending-Miser EZ may be purchased without the PIR Sensor, but then use its 10 foot repeater cable to allow it to be controlled from the PIR sensor of the primary Vending-Miser EZ.
Vending-Miser VM170 Specifications
Input Voltage 115V
Input Frequency 50/60 Hz
Maximum Load 12A (steady-state)
Power Consumption 0.1 to 99.9%
Occupancy Timeout 15 minutes
Auto Re-power 90 minutes maximum. Dynamically adjusted, based on ambient temperature
Dimensions 4.5"W x 1.75"H x 3.25"D
Weight 2.2 lb