loading
reading
writing
saving
searching
Technics SL-5 Linear Tracking Direct Drive Turntable with Phono Cartri - $120 (Camarillo)
QR Code Link to This Post
Complete Package with Dust Cover, Midrange Audio Technica Phono Cartridge and Cables
Very Compact and Runs Perfectly
Here are the features and specs:
The Technics SL-5 is a compact, record-jacket-sized (315 x 315 mm) fully automatic direct-drive turntable produced from 1982 to 1983. [1, 2]
Key Features
• Design & Chassis: Built with a TNRC (Technics Non-Resonance Compound) cabinet to absorb vibrations and resist acoustic feedback. Shaped like the size of an LP record jacket. [1, 2]
• Linear Tracking Tonearm: Features a dynamically balanced, low-mass linear-tracking tonearm (9g effective mass) with a 4-pivot gimbal suspension and an optoelectronic sensor controlled by a microcomputer. [1, 2]
• Fully Automatic Operation: Integrated 4-key electronic control panel for start, stop, cueing, repeat, and manual track scanning (hold start or stop to move the arm forward or backward). [1]
• Automatic Detection: Automatically senses record size and presence, and sets rotational speed when set to auto mode. [1, 2, 3]
• Cartridge: Uses a plug-in T4P / P-mount moving magnet stereo cartridge (commonly shipped with the Technics EPC-P24S). [1, 2, 3]
Technical Specifications
• Drive System: Direct drive
• Motor: Brushless DC motor with
FG servo control
• Platter: 300 mm (12-inch) aluminum die-cast
• Speeds: 33-1/3 and 45 rpm (automatic or manual selection)
• Wow and Flutter: 0.025% WRMS (or 0.012% WRMS depending on measurement standard)
• Rumble / Signal-to-Noise Ratio: -78 dB (weighted)
• Tracking Error Angle: Within ±0.1°
• Tonearm Effective Length: 105 mm
• Dimensions (W x H x D): 315 x 88 x 315 mm (approx. 12.4 x 3.5 x 12.4 inches)
• Weight: 4.4 kg (9.7 lbs)
• Power Consumption: 9.8W