3D Printer: Seemecnc Rostockmax v4 US made - $250 (Beaverton)
‹image 1 of 8›
QR Code Link to This Post
The SeeMeCNC RostockMAX v4 is a large-format delta 3D printer with a build volume of 280 mm (11”) diameter × 385 mm (15”) height cylindrical print area. It works very well and is still being used. I just need a higher hotend temps for occasional engineering material.
You get the machine on your WiFi and then enter the IP address on your pc. You use the Duet web wnterface for loading files, adjusting parameters... The printer also has a touchscreen for running macros like load/unload filament, bed leveling…as well.
I use Cura10 for slicing and it works well.
The company is still in business but this model has been replaced. Made in America and robust. Bought new for over $1200 and current model is $1499.
Thanks
The RostockMAX v4
The RostockMAX v4 fully assembled delta printer features a powerful A/C heated bed and metal enclosure. The improved heated bed improves adhesion and performance. Responsive power to reach higher bed temperatures in minutes. Typical heated bed response time to reach 60C temperature is approximately 4 minutes and 100C in about 8 minutes. Combined with the SE300 auto probing hotend, the RostockMAX has never been better.
The 32 bit Duet Wifi controller provides smooth, precise, and quiet motion control. The smooth motion is a combination of the 32 bit control board, 0.9 degree stepper motors, and our unique low-no maintenance Cheapskate linear motion design. The EZR Struder precisely drives filament to our SE300 probing hotend. The SE300 hotend is ready for filaments requiring temperatures up to 280C.
Features
* Touchscreen Controller w/SD Card Reader
* 32 bit WiFi Duet Control Board
* Quiet motion control
* Browser Control from your PC or MAC or phone or tablet
* Auto bed leveling through SE300* probe
* Heated Bed with borosilicate glass build plate
* fine 0.9 degree axis stepper motors
* standard 0.5mm diameter nozzle
* EZR Struder cold end filament feeder with 0.9 degree stepper
Printer Specifications
* WiFi Control - Easy Touchscreen Setup
* 280mm Dia x 385mm H Print Area
* Minimum Capable Layer Height with 0.5mm nozzle of 0.08mm
* Maximum Recommended Layer Height with .5mm nozzle of .4mm
* Power Requirements 110VAC @ 500 watts
* Max Heated Bed Temp 110C
* Max Hotend Temp 280C
* Max Printing Speed @.2mm Layer Height 100mm/s
* Max Travel Speed 350mm/s
* Step Resolution 0.01mm
* Typical bed probe auto-calibrate deviation 0.08mm to 0.13mm
* Printer overall size without spool 430mmW x 410mmL x 910mmH
* Printer overall size with spool on top 430mmW x 410mmL x 1130mmH