* Blade: 10 in.
* Motor: 15 amp, 120V
* No-load speed: about 4,800 RPM
* Maximum cut depth at 90°: about 3-9/16 in.
* Maximum cut depth at 45°: about 2-1/2 in.
* Blade bevel: 0–45°
* Rip capacity: roughly 31 in. to the right of the blade with the rails in the normal configuration
* Arbor: 5/8 in.
* Table: aluminum main table with movable accessory tables
* Crosscut system: built-in sliding miter table
* Fence: front/rear rail locking rip fence
* Dust port: approximately 2-1/2 in.
* Weight: roughly 100–110 lb with the stand, depending on accessories