loading
reading
writing
saving
searching
Sawmilling service - $100 (Archer)
condition:
new
QR Code Link to This Post
I charge $1.25-1.50 per foot for all lumber milled for customers on my bandsaw mill, regardless of thickness or width. I can mill a maximum of 23” wide on my bandmill allowing me to process logs from 10” diameter up to 29” diameter. Logs have to be at least 5ft, but can be up to 12.5ft.
$50 flat feet for any log that produces less than 40ft
After milling is done, I’m happy to help walk you through the process of drying it for yourself over time for the lowest price possible on valuable hardwoods. It’s not complicated at all, just takes proper stacking and lots of time.
Don’t want to wait multiple seasons for your lumber to be ready to use? Once they’ve airdried for a couple months I offer kiln drying and can generally have anything other than oak kiln dried in 7-10days per inch thickness. I use a state of the art iDry vacuum kiln for guaranteed dry and sanitized.
It’s my continued mission to become north-central Florida’s go-to sawyer service by providing milling and lumber at a price that makes woodworking affordable again. $5/bf for nearly all locally growing hardwoods up to 23” wide.
Im onsite between Jonesville and archer Tuesday through Saturdays and schedule visitors 12-5. Just reach out and let me know when to expect you and I’ll send the address.
10yrs of Proudly Serving Gainesville and surrounding areas, you can find me online at facebook.com/floridawoodsmith.
I offer milling, kiln service, as well as kiln dried lumber and slabs in both hardwoods and cedar. All lumber is kiln dried below 10% before advertising in a state of the art iDry vacuum kiln.
For more info on services I offer check out my website floridawoodsmith.com
Feel free to message me with any questions,
Happy woodworking