loading
reading
writing
saving
searching
Grizzly G0537 22" Variable-Speed Scroll Saw - $225 (Winfield)
QR Code Link to This Post
This is a large-capacity, heavy-duty scroll saw with a 22" throat and variable speed from approximately 425–1,300 strokes per minute. It has been thoroughly checked, serviced and test-cut and is ready to use.
• 22" throat capacity
• Variable speed, 425–1,300 SPM
• 2-1/4" maximum cutting thickness
• Tilting table
• 5" pin-end blade system
• Built-in air blower keeps the cut line clear
• Very quiet and smooth through the entire speed range
• No unusual vibration or bearing noise
• Table, blade tensioning and speed controls all operate properly
• Includes an assortment of NEW 5" pin-end blades in 10, 15, 18 and 24 TPI
The original air-blower bellows had deteriorated with age, a common issue on this model. It has been replaced with a new industrial NBR bellows and tested—the blower works very well.
I tested the saw under load through its speed range. It cuts smoothly and accurately and runs exceptionally quietly.
A very solid 22" scroll saw for woodworking, fretwork, crafts and larger scroll-saw projects.
Located in Winfield, PA area. You're welcome to see it run and make a test cut before purchasing.