Everything works as it should.
New top end last winter
BPRATV NIKASIL CYLINDER SLEEVE TOP END KIT
Wiseco Piston and rings
Cometic gaskets
Kibble white valve seals
Yamaha: timing chain, oil pump chain, starter one way bearing, clutch one way bearing.
Diffs were replaced before i got it. Have had no issues with them
4wd and diff lock work.
Display works. Sun-faded.
Full metal skid plate.
Good tires (one has inner tube)
The bad.
A Rear axle started clicking today.
Trans has developed shifting issues.
Works great in reverse, high gear and low gear.
Neutral and park are extremely hard to find.
2003 tan Grizzly
Was bought to motor swap into camo Grizzly. Swap over the new top end and Yamaha parts.
The good:
Runs good and shifts great.
Display works, but is sun-faded
4wd actuator works
Full exhaust
The bad:
No air box
Front and rear diff are toast. Rusted solid.
Axles are cut
Front bumper is bent.
No CDI or battery
Warn winch. No idea if it works.
Please look at the pictures. If you don’t see it, it doesn’t come with it.
Please ask questions.
Can Test drive the camo bike.
Can start and run the tan bike for verification.
Located in Flint Tx off Hwy 69 between Tyler and Bullard.