loading
reading
writing
saving
searching
Computer CNC Automatic Coil Winder Winding Machine 110V 131004 - $1,090 (Tampa)
QR Code Link to This Post
*cash preferred*
The automatic single-axis winding machine is mainly used for small-batch production or customization of special coils, and is suitable for winding precision electronic components such as transformers and inductors.
Automatic wire winding machine: putting stepper motor driver, DC motor speed controller, brake and power supplier control circuits into one control box, simultaneously.
Features
1.Single chip Microprocessor design, has much higher performance and higher functions; it also has lower sensitivity to external power fluctuation or to external electromagnetic interference.
2.Memory use flash chips , capacity capable of storing up to 1000-step winding data, 9 winding parameters, and 5 options can be independently assigned for each step. Memory is retained in the power-off and battery-free state.
3.Winding speed can be specified by using the front panel keypad, resulting in easy programming of multi-step, multi-speed settings.
4.Guiding traverse shaft stepper motor with a constant-current driver offering fast wire guiding speeds.
5.Guiding traverse shaft offering 10 steps moving speed selection.
Specification :
Power voltage:110V 50/60Hz 1PH
Winding displacement machine: step-servo motor
Spindle motor: Brushless DC
Windable wire diameter:0.03-1.8mm
Maximum winding width:4.2INCH 108MM
Maximum framework diameter:200mm
Maximum turning speed of cop:60-2000circles/minute, speed adjust function
Storable winding groups:999 groups
Complete appliance weight:30kg
Size:12.5*12*16 INCH(32*30*41cm)
Power：45 - 250 W
Wire crossing board & Barrier tape rack The thread passes through the ceramic eye, the wool felt (adjusting the tension), and the thread clamp (a sleeve or guide needle can be added at this position).
Tape rack
Foot switch
CNC controller
Machine use and maintenance:
1. The machine must be connected with reliable ground wires;
2, after using a certain time, pay attention to cleaning up the controller and the dust accumulation inside the machine and so on;
3.check the lubricating parts regularly;
4, check the machine fastening screw, synchronous belt, button switch welding point and so on.
How to use
1. Connect to a 220V power supply.
2. Set the working parameters.
3. Adjust the path of the circuit properly.
4. Just turn on the switch and you can start working.
Item included:110V Computer CNC Automatic Coil Winder Winding Machine*1
Item Number: 131004