loading
reading
writing
saving
searching
220V Vibrating concrete table motor vibration plate surface platform v - $190 (Tampa)
QR Code Link to This Post
*cash preferred*
Description
Coagulated soil vibration table is mainly composed of bottom frame, vibrator spring and
other parts, table and bottom frame are made of steel plate and section steel welding,
vibration table is an electric motor and a pair of the same eccentric wheel composition.
And through a pair of hanger coupling installed in the center of the table (opposite),
plays the role of smooth, vertical direction in the process of vibration and compaction.
Technical parameters
Mesa dimension 0.5*0.5M (19.6'*19.6')
Frequency 2860 times/min
Amplitude 0.3-0.6 mm
Amplitude power 0.55kw
Voltage 220 v
Maximum load 100KG
Feature
1.Thickening spring design: The hardness of spring is better than that of ordinary spring,
vibration sensing effect is better, and the spring is more durable after thickening.
2.High quality copper core motor: Quality assurance, long service life, not easy to break
down, thick copper wire design, more stable and worry saving.
3.Thickened table top anti-corrosion treatment: It is made of thickened steel, painted,
anticorrosive and rustproof, which prolongs the service life of the vibration table.
Installation and maintenance
1.The foundation should be laid before the vibration table is installed (Use level ruler ) ,
according to the position of the bottom frame bolt hole fixed bolts, fixed bolts must be
tightened and fixed.
2.When the vibration table is installed and the machine is debugged, start the machine
for
3-5 minutes and then stop.All fixed bolts shall be inspected and tightened before use if
loose.
3.The concrete products should be stabilized on the vibration table during the process of
vibration. The required vibration-compacted products should be placed symmetrically
with the vibration table to balance the load. The fastening device of vibration-
compacted products can be designed and allocated by users according to their own
needs.
4.The bearing of the vibrator should be checked frequently and cleaned regularly to
replace the lubricating oil. Keep the bearing well lubricated and prolong the service life
of the vibrator.
NOTICE :The paint on the machine is slightly off, but the effect is not affected
The machine is 220V and does not have a plug. The power line is not divided into neutral line and live line, and can be directly connected to the air switch.