Rebuilt Oldsmobile 455 engine, this engine was rebuilt at Automotive Machine Shop in Salem Oregon several years ago, cylinders bored, crankshaft machined, new camshaft, lifters, double roller timing set, comp cams camshaft, new pistons. The engine was built to be a backup/replacement for a 1977 GMC Motorhome but the coach never needed a new motor.
I know the head have hardened valve seats and are set up for unleaded gasoline.
Block Casting number is 396021 Fa
Cylinder Head Casting Number is 411 789 "J" heads
Never Ran, has sat on a engine cradle in a heated climate controlled shop since being rebuilt, no moisture or weather exposure ZERO Rust/Corrosion.
Includes sheet metal and 4 barrel intake manifold as pictured.
If needed I have all (or 95%) of the bolt on parts- new alternator, new high torque starter, water pump, pulleys, A/C Compressor (used not sure of condition) refinished factory exhaust manifolds, carbs, HEI Distributor(s), New in the Box Holley Sniper EFI fuel injection with all parts including fuel pump, lots of parts.
Also have GMC motorhome upgrade kits- Rear Wheel Disc Break Upgrade (New in Boxes), HD Torsion Bars (Allied GMC Red Bars), 1 Ton Front End Conversion Kits (2 Complete Kits with all parts), Air Level Valves (Applied GMC new and no longer made),
Also have 4 core motors (they were all in running condition when pulled just tired) have not pulled casting numbers yet but I think there is 3 455's and one 403 but it may be 2 455 and 2 403. One set of "J" cylinder heads.
I do NOT have any of the paperwork on the engine rebuild and I spoke to Salem Machine and they use a handwritten paperwork file systems so the paperwork from there end cannot be found.
I can put the engine on a stand for inspection to pull the oil pan and verify condition.