EXPERIENCED ELECTRICIAN / JOURNEYMAN WANTED – COMPLETE HOUSE REWIRE – PINELLAS COUNTY, FL
Location: Pinellas County, Florida
Property: Small 3-Bedroom / 2-Bathroom, Single-Story Home
Project: Complete Residential Electrical Rewire / Major Renovation
Compensation: Best Total Labor-Only Price Requested
Materials: Supplied by Property Owner
Schedule: Flexible – Weekends and Evenings Welcome
Experienced real estate investor/rehabber seeking a highly experienced electrician, journeyman electrician, or skilled residential electrical contractor to perform a complete electrical rewire and installation at a small, single-story, 3-bedroom, 2-bathroom home undergoing a major renovation in Pinellas County, Florida.
IMPORTANT: THE HOUSE HAS BEEN COMPLETELY GUTTED TO THE STUDS. ALL DRYWALL HAS BEEN REMOVED FROM THE WALLS AND CEILINGS, PROVIDING OPEN ACCESS FOR NEW ELECTRICAL WIRING.
This is a complete residential electrical rough-in and finish installation, including new wiring for lighting, outlets, switches, appliances, HVAC equipment, bathroom fixtures, exterior lighting, security cameras, and other electrical components.
AN ELECTRICAL PERMIT HAS ALREADY BEEN OBTAINED FOR THE PROJECT. A NEW PERMIT IS NOT BEING REQUESTED.
All work must be performed professionally, in accordance with applicable electrical codes and inspection requirements, and must pass the required rough-in and final electrical inspections.
ALL MATERIALS WILL BE PROVIDED BY THE PROPERTY OWNER. PLEASE PROVIDE ONE TOTAL LABOR-ONLY PRICE FOR THE COMPLETE PROJECT.
SCOPE OF WORK
1. COMPLETE HOUSE REWIRING
- Run all new electrical wiring throughout the entire home.
- Install new wiring for lighting, switches, receptacles, ceiling fans, appliances, and other electrical equipment.
- Install all necessary electrical boxes, including single-gang and multi-gang boxes.
- Install dedicated circuits where required.
- Properly route, secure, and protect wiring throughout the exposed wall studs and ceiling framing.
- Complete rough-in wiring before drywall installation.
- Return after drywall installation to complete all devices, fixtures, switches, and cover plates.
2. NEW 200-AMP ELECTRICAL PANEL – 42 SPACES
- Remove and replace the existing electrical panel as required.
- Install a new 200-amp, 42-space electrical panel.
- Install new AFCI breakers, with GFCI or dual-function protection where required.
- Properly terminate and organize all new branch circuits.
- Provide appropriate grounding and bonding.
- Properly label and identify all circuits.
- Verify electrical load requirements for appliances, HVAC equipment, and other loads.
- Ensure panel installation complies with applicable code requirements.
Any required service entrance, meter, or utility modifications beyond the panel replacement should be identified upfront.
3. RECESSED LED CEILING LIGHTING
- Install new 6-inch LED recessed ceiling lights throughout the home.
- Locations include bedrooms, bathrooms, kitchen, living room, dining room, hallways, and other designated areas.
- Run necessary wiring and switch legs.
- Install appropriate lighting boxes or mounting provisions.
- Install and connect LED fixtures after drywall installation.
4. ALL NEW LIGHT SWITCHES & CONTROLS
- Run new wiring for all switches.
- Install single-pole, three-way, and four-way switches where needed.
- Install 2-gang, 3-gang, and 4-gang boxes where required.
- Install Lutron Caseta smart switches/dimmers and Pico remotes in designated locations.
- Install standard Decora-style switches in remaining locations.
- Install matching cover plates throughout.
5. ALL NEW ELECTRICAL OUTLETS
- Install new receptacles throughout the entire home.
- Install required GFCI and AFCI protection.
- Install dedicated appliance outlets and circuits.
- Install tamper-resistant receptacles where required.
- Install Decora-style receptacles and matching cover plates.
6. CEILING FANS
- Run new wiring to ceiling fan locations.
- Install fan-rated electrical boxes and supports.
- Install ceiling fans and associated controls.
- Provide separate fan and light controls where designated.
7. KITCHEN ELECTRICAL – ALL NEW WIRING
- Dedicated electrical circuits for the double wall oven.
- Wiring and connections for microwave.
- Dishwasher circuit and connections.
- Garbage disposal circuit and switch.
- Refrigerator receptacle/circuit.
- Required kitchen countertop receptacle circuits.
- Range hood or ventilation wiring, if applicable.
- Kitchen island or peninsula outlets where required.
- Recessed lighting, pendant lighting, and designated under-cabinet lighting.
8. HVAC / AIR CONDITIONING ELECTRICAL
- Run new electrical wiring and dedicated circuits for HVAC equipment.
- Install electrical connections for indoor and outdoor AC or mini-split equipment.
- Install disconnects and required circuit protection.
- Provide thermostat and control wiring as required.
- Coordinate wiring with selected HVAC equipment.
9. NEW TANKLESS WATER HEATER
- Install electrical wiring and connections for the tankless water heater.
- Provide appropriately sized dedicated circuits, breakers, and disconnects as required.
- Verify electrical requirements against the selected unit specifications.
10. WALL-MOUNTED TV OUTLETS – ALL ROOMS
- Run wiring and install recessed electrical receptacles for wall-mounted televisions.
- Include bedrooms, living room, and other designated TV locations.
- Position outlets to be concealed behind televisions.
- Install low-voltage boxes or pathways for HDMI, coaxial, Ethernet, or other cables where designated.
11. EXTERIOR RING FLOODLIGHT CAMERAS – 4 TOTAL
- Run permanent electrical wiring for 4 Ring floodlight cameras, one at each exterior corner of the house.
- Install weatherproof electrical boxes.
- Properly position wiring for camera coverage.
- Install, connect, and test all four cameras.
12. BATHROOM ELECTRICAL
- New wiring for bathroom vanity lights.
- Wiring for illuminated LED mirrors.
- Recessed outlets behind LED mirrors where appropriate.
- Bathroom exhaust fans and switches.
- Bathroom GFCI receptacles and required circuits.
- Recessed LED ceiling lighting.
- Additional bathroom electrical connections as needed.
13. DINING ROOM / DECORATIVE LIGHTING
- Install chandelier or decorative dining room fixtures.
- Install pendant lighting where designated.
- Install appropriate boxes, supports, and switches.
14. EXTERIOR LIGHTING & OUTLETS
- Exterior entry lighting.
- Patio and exterior coach lights.
- Weatherproof exterior outlets and covers.
- Required GFCI protection.
- Exterior lighting switches and controls.
15. SMOKE & CARBON MONOXIDE DETECTORS
- Run wiring for interconnected smoke and carbon monoxide alarms where required.
- Install detectors in appropriate locations.
- Provide battery backup where required.
- Test for proper operation.
16. LOW-VOLTAGE / INTERNET / COMMUNICATION WIRING
- Install low-voltage boxes and pathways for televisions, internet, and communications.
- Run Cat6 Ethernet cable to designated rooms and TV locations as agreed.
- Provide wiring or pathways for Wi-Fi access points and security devices where designated.
17. ROUGH-IN, FINAL INSTALLATION & INSPECTIONS
- Complete electrical rough-in while walls and ceilings are open.
- Secure wiring and install protective nail plates where required.
- Coordinate and pass required rough-in inspection before drywall installation.
- Return after drywall to install switches, outlets, fixtures, fans, and electrical devices.
- Test all circuits and electrical equipment.
- Correct any installation deficiencies.
- Coordinate and pass final electrical inspection.
- Clean up installation debris.
PERMITTING & PAYMENT TERMS
THE PROJECT IS ALREADY PERMITTED.
The necessary permit has already been pulled. Obtaining a new permit is not included in the requested scope.
All work must meet applicable electrical codes and inspection requirements and be performed under legally appropriate licensed contractor and permit arrangements.
PAYMENT WILL BE TIED TO TWO PROJECT MILESTONES:
ROUGH-IN PAYMENT
- Complete the agreed electrical rough-in work.
- Pass the required rough-in inspection.
- The agreed rough-in labor payment will be released upon satisfactory completion and passing inspection.
FINAL PAYMENT
- Complete all remaining electrical installations.
- Pass the required final electrical inspection.
- The remaining agreed labor balance will be released upon satisfactory completion and passing final inspection.
No advance payments. Payments are based on completed work and passing the respective inspections.
PRICING & ESTIMATED COMPLETION TIME
PLEASE PROVIDE YOUR BEST TOTAL LABOR-ONLY PRICE FOR THE ENTIRE PROJECT.
All major electrical materials, fixtures, outlets, switches, wiring, breakers, electrical panel, and related supplies will be provided by the property owner.
Your quote should include complete rough-in labor, panel installation, new wiring and circuits, boxes, fixtures, devices, connections, testing, inspection coordination, and return visits for final installation.
PLEASE ALSO PROVIDE:
- Estimated number of working days to complete the rough-in.
- Estimated number of working days to complete final installation.
- Estimated total labor time for the project.
- Earliest available start date.
- Whether you work independently or with a crew.
PLEASE KEEP IN MIND THIS IS A SMALL, SINGLE-STORY, 3-BEDROOM, 2-BATHROOM HOME, NOT A LARGE MULTISTORY PROPERTY.
The home is already completely gutted, with open walls and ceilings, which should make the electrical rough-in considerably more accessible and efficient than a typical occupied-home rewire.
Please take the property's relatively small size and open framing into consideration when providing your labor price and estimated completion time.
FLEXIBLE WORK SCHEDULE – WEEKENDS WELCOME
I AM FLEXIBLE WITH WORK SCHEDULES AND AVAILABILITY.
If you currently work for an electrical company during the regular workweek and are looking for additional work on weekends, evenings, or other available days, you are welcome to respond, provided the work can be performed under legally appropriate licensing and permit arrangements.
- Weekend work is acceptable.
- Evening work may be accommodated.
- Flexible scheduling is available.
- Individuals or small crews are welcome.
- The main priorities are experience, quality workmanship, competitive pricing, and timely completion.
While scheduling is flexible, I am looking to complete the project as expeditiously as reasonably possible, without unnecessary delays.
I am particularly interested in an experienced electrician or crew who can offer competitive investor-friendly labor pricing while completing the project efficiently and professionally.
EXPERIENCE & REQUIREMENTS
ONLY EXPERIENCED ELECTRICIANS / JOURNEYMEN / ELECTRICAL CONTRACTORS SHOULD RESPOND.
- Extensive residential electrical installation and rewiring experience.
- Experience with complete electrical rough-ins in gutted homes or new construction.
- Experience installing and replacing electrical panels.
- Knowledge of applicable Florida electrical codes.
- Experience with dedicated appliance circuits and HVAC wiring.
- Familiarity with Lutron Caseta switches and Ring floodlight cameras preferred.
- Experience installing recessed LED lighting, ceiling fans, and decorative fixtures.
- Must have professional tools, ladders, testing equipment, and reliable transportation.
- Must be dependable and capable of completing both rough-in and final installation.
- Must work under the appropriate licensed contractor and permit arrangements where required.
WHEN RESPONDING, PLEASE PROVIDE:
1. YOUR BEST TOTAL LABOR-ONLY PRICE FOR THE COMPLETE PROJECT.
2. ESTIMATED NUMBER OF DAYS TO COMPLETE THE ROUGH-IN.
3. ESTIMATED NUMBER OF DAYS TO COMPLETE FINAL INSTALLATION.
4. Your earliest available start date.
5. Whether you are available weekdays, evenings, weekends, or a combination.
6. Your name and telephone number.
7. Number of years of residential electrical experience.
8. Whether you are a licensed electrical contractor, journeyman, or experienced electrician working under a licensed contractor.
9. Electrical license number, if applicable.
10. PICTURES OF PREVIOUS ELECTRICAL WORK – REQUIRED, particularly rewiring, rough-ins, panel installations, and residential renovation projects.
11. Brief description of past and current electrical work experience.
12. Whether you work independently or have a crew.
13. Confirmation that you agree to payment following successful rough-in and final inspections.
14. Any anticipated exclusions or additional costs.
ADDITIONAL INFORMATION
I am an experienced real estate investor and residential rehabber seeking an electrician who understands residential renovations, works efficiently, and offers competitive investor-friendly pricing.
THIS IS A SMALL, SINGLE-STORY, 3-BEDROOM, 2-BATHROOM HOUSE THAT HAS ALREADY BEEN COMPLETELY GUTTED TO THE STUDS. THERE IS NO DRYWALL REMOVAL OR DEMOLITION REQUIRED TO ACCESS THE WALLS OR CEILINGS.
THE PROJECT IS ALREADY PERMITTED.
Weekend and flexible scheduling arrangements are welcome, particularly for experienced electricians who may already be employed during the regular workweek.
My goal is to find someone who can complete the entire electrical project professionally, as quickly as reasonably possible, and at the most competitive labor price, while ensuring the work passes all required inspections.
Additional electrical and renovation projects may be available for the right person or crew.
SERIOUS, EXPERIENCED APPLICANTS ONLY.
TEXT PREFERRED: 727-286-0850
Please text your experience, pictures of previous work, availability, BEST TOTAL LABOR-ONLY PRICE, AND ESTIMATED NUMBER OF WORKING DAYS FOR BOTH ROUGH-IN AND FINAL INSTALLATION.