loading
reading
writing
saving
searching
Electro-Voice CPS2.12 2400W Power Amplifier - $300 (Roseville)
QR Code Link to This Post
PRICE ABOVE IS FOR EACH
About the Electro-Voice CPS2.12 2400W Power Amplifier
Designed for the contractor, the Electro Voice CPS 2.12 MK II feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the Electro Voice CPS 2.12 MK II also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net software.
Electro-Voice CPS2.12 2400W Specs:
Amplifier Gain: 32 dB
Analog Inputs: 2, electronically balanced, Phoenix-type
Audio Network: No
CAN Bus Interface: Optional (RCM-810 card)
Continuous Rated Power: (1 kHz, THD 1%) 2 1800 Watts
Continuous Rated Power: (1 kHz, THD 1%) 4 1200 Watts
Continuous Rated Power: (1 kHz, THD 1%) 8 750 Watts
Continuous Rated Power: (20-20 kHz, THD<0,2%) 4 1100 Watts
Continuous Rated Power: (20-20 kHz, THD<0,2%) 8 550 Watts
Cooling: Front-to-Rear, 3-stage-fans
Crossover Type: Modular
DIM 30: 0.05 %
Frequency Response: 10 Hz - 40 kHz ±1 dB
Impedance: 2/4/8
Input Impedance (Balanced): 20 k
Input Sensitivity: +6.6 dBu (1.66 Vrms)
Intermodulation Distortion (SMPTE): 0.1 %
Maximum Bridged Output: 4 3600 Watts
Maximum Bridged Output: 8 2400 Watts
Maximum Input Voltage: +21 dBu (8.69 Vrms)
Network Control (IRIS-Net): Optional (RCM-810 card)
Slew Rate: 30 V/µs
Topology: Class-H
Total Harmonic Distortion: 0.03 %
Variable Load Drive (VLD): No
Height: 2RU 88.1 mm (3.47")
Width: 482.6 mm (19")
Depth: 421.5 mm (16.59")
Weight Net: 7 kg (15.43 lbs)
Speakers subwoofers subs bass amp amps