This is a home made tiny home floor on a trailer frame. The floor framing is pressure treated 4x4's with the deck being 2x6 tongue and groove car decking. It has two axles, a black water tank, a fresh water tank and steps on the passenger side. The trailer is wired for lights and has a 4 pin harness and a 2-5/16" ball hitch. The tongue hand crank works very well. Since it is home made, it has no registration. The owner will have to use the bill of sale and go to the scales at the landfill and take the weight slip in to Tax Collector to get plates for it. In the photos you will see where when I was constructing it, I wrote the measurement of where the toilet rough in dimensions are so if it is used for a tiny home in the future, the toilet flange can be cut out. I also marked the center of the toilet rough in with a X in sharpie prior to installing 3 coats of Cabot solid body stain sealer with top coat of clear sealer. Should hold up for a long time in the weather. Every piece of car decking was sealed 4 sides and the ends prior to assemble so the pressure treated car decking would last "forever". If you have ramps, you could use it to haul large equipment around or even vehicles. If you don't have ramps, you will need to work out how to get whatever you are carrying up onto the top of the deck. Contact through craigslist email to set up a time to come see it. If it is listed, then it is still available. Taking offers
11/1/26 I am adding this offer. if anyone would like to purchase just the 8'x28" steel trailer frame, I will remove and keep all of the materials that I purchased for the flooring I built, $2,580 worth, and I will sell just the frame of the trailer for $1,000. Then you can build what you want with the frame. It is currently wired for lights but again not weighed or registered. That would be up to the buyer. The flooring material is of use to me in other projects.