ACM/IMP Wall Panel Installer $22 - $46/hr

Global Roofing Group is hiring an experienced ACM/IMP Wall Panel Installer for a skilled journeyman role focused on commercial insulated metal panel (IMP) systems. Working with the Foreman, fellow installers, and adjacent trades, you will turn approved drawings into finished, weathertight wall systems through layout, panel installation, metal fabrication, flashing, and quality inspections. The company provides technical onboarding, ongoing product training, and support from building envelope specialists. Travel and extended out-of-town assignments are required, with occasional night, weekend, and shutdown work. Every employee has authority to stop work when conditions are unsafe.

Walk-ins welcome: Apply in person at our corporate office, 2401 E. Magnolia St., Phoenix, AZ 85034, Monday through Friday, 8:00 a.m. to 5:00 p.m.

Responsibilities

• Read shop and erection drawings, panel schedules, and architectural details to verify panel identification and installation locations.
• Establish control lines and panel layouts using lasers, levels, string lines, and measuring tools. Check substrates, girts, clips, and sub-framing; document and report out-of-tolerance conditions to the Foreman.
• Receive, inspect, store, stage, rig, and set panels using appropriate lifting equipment and safe handling practices that protect finished surfaces.
• Install horizontal and vertical IMP systems, including concealed- and exposed-fastener assemblies, while maintaining plumb, alignment, joint spacing, and manufacturer requirements.
• Install tracks, clips, fasteners, flashing, trim, closures, sealants, gaskets, and transitions to maintain continuous air, water, and thermal barriers.
• Cold-cut, notch, and fit panels around openings, corners, and penetrations; fabricate and fit metal trim.
• Inspect completed work, photograph concealed conditions, record production and quality information, participate in mock-ups and water testing, and complete punch-list corrections.
• Follow fall-protection and jobsite safety requirements, inspect equipment before use, and operate lifting and material-handling equipment only when trained and authorized. Stop work when wind, weather, rigging, or other conditions are unsafe.
• Coordinate with the Foreman and adjacent trades, mentor apprentices and helpers, maintain an orderly work area, and care for company tools, equipment, and materials.

Qualifications

• At least 4 years of hands-on commercial IMP or architectural metal wall panel installation experience, or completion of a recognized sheet metal, glazing, or cladding apprenticeship with demonstrated IMP field experience.
• 10 or more years in architectural facades, including experience with multiple manufacturers and systems such as aluminum composite material (ACM), metal composite material (MCM), plate, rainscreen, composite, and single-skin panels.
• Ability to work independently from installation drawings and architectural details, use layout instruments, and maintain panel alignment across long elevations.
• Working knowledge of building-envelope systems, including air and vapor barriers, water management, and thermal continuity.
• Proficiency in metal fabrication and field modification, including brake work, nibblers, shears, hemming, and cold cutting of coated metal.
• Ability to work at heights from lifts, scaffolding, and swing stages, and to travel for extended assignments with occasional night, weekend, and shutdown work.
• Valid driver's license; a DOT medical card is required when operating qualifying vehicles.
• Ability to meet pre-employment and site-required substance-screening requirements.
• OSHA 30-Hour Construction training required. OSHA 10 is accepted at hire, with company-paid OSHA 30 completion within 90 days.
• Required safety training includes fall protection with annual refreshers, boom/scissor/articulating lift operator certification, and silica and respirable dust awareness where exposure applies.
• Ability to obtain a Transportation Worker Identification Credential (TWIC) for jobsites requiring it, including many Gulf Coast assignments. Rigging and signalperson qualifications are required for crane-assisted panel setting.
• Preferred: Experience with BIM-derived installation drawings, design-assist field coordination, apprentice training, and bilingual English/Spanish communication.
• Preferred certifications: Telehandler/rough-terrain forklift, First Aid/CPR, and manufacturer installer training such as Kingspan, Metl-Span/Nucor, CENTRIA, or AWIP.

Benefits

• Health, dental, and vision insurance.
• Paid time off and holidays.
• Vehicle allowance and fuel card.
• Company-provided cell phone and laptop.
• Expense account for travel, site visits, and customer engagement.
• Technical onboarding, ongoing product training, and support from building envelope specialists.
• Company-paid OSHA 30 training for employees hired with OSHA 10, to be completed within 90 days.
• Company-provided First Aid/CPR training.
• Competent-person fall-protection training available for the advancement track.

Global Roofing Group is an equal opportunity employer committed to a diverse, inclusive workplace. Employment decisions are made without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Apply now in 2 minutes!




Powered by