loading
reading
writing
saving
searching
Ender 5 Pro (Modified) - $15 (Pinecliff Cottage Grove)
QR Code Link to This Post
This would also include a boatload of unused 0.2, 0.3, 0.4, 0.6, 0.8 nozzles, spare parts for the machine (like extra extruders from the extruder replacement, fans from other cooling solutions used over the years), and a spare motherboard that I had from a Voxelab Aquila repair I did for a friend.
Here's the big "but": the SD card reader does not work. I didn't really try to fix it at all; I didn't even try to clean the connections with alcohol or check the connections on the motherboard. It's possible this is an easy fix, but if I were going to keep it I would probably look at putting in a new motherboard, touchscreen, and Marlin or Klipper. I don't want to do that because this is my secondary printer and I don't need to fill up this house with plastic prints any faster than one printer can go.
If you want this, I would assume you are going to have to tinker with it to get the SD card reader working again OR move to a wireless/LAN printing set up. I'm asking for $15 so I can take that and buy another roll of filament, so it's largely symbolic.
Located in Cottage Grove, if you want email me through the link and I'll give you my phone number and address after I'm sure you aren't a bot.