loading
reading
writing
saving
searching
75 Ton Dake Press - $3,500
77 West Hill Rd
QR Code Link to This Post
Core Performance Capacities
* Maximum Pressing Capacity: 75 Tons
* Maximum Pulling/Ram Return Capacity: 28 Tons
* Ram Speed (Advance): 28 inches per minute (IPM)
* Ram Speed (Pressing): 5 inches per minute (IPM) [1, 2, 3]
Dimensional & Working Range
* Width Between Upright Columns: 44 inches
* Width Between Table Channels: 8-1/4 inches
* Ram Stroke Length: 10 inches
* Maximum Ram-to-Table Distance (Daylight): 36 inches
* Minimum Ram-to-Table Distance: 6 inches
* Horizontal Workhead Travel: 24 inches (The roller-mounted workhead glides side-to-side on ball bearings for seamless off-center pressing). [1, 2, 3, 4]
Electrical & Mechanical Details
* Motor: 2 HP, 1745 RPM. [1, 2]
* Electrical System: Configured from the factory for dual-voltage 220V/440V, 3-Phase, 60 Hz. (Double-check the motor casing junction box to see which voltage it is currently wired to accept). [1, 2]
* Actuation Type: Double-acting cylinder, operated via a precise, single-acting manual 4-way throttling valve for granular fingertip pressure adjustments. [1, 2, 3]
Physical Footprint
* Overall Height: 86 to 87 inches
* Base Dimensions: 55.5" Length x 36" Width
* Total Machine Weight: Approximately 1,245 lbs to 1,950 lbs depending on the specific fluid capacity and style of integrated base anchoring plates. [1, 2, 3]