H&R Molding LLC is hiring a full-time Maintenance Technician for our plastic injection molding shop in Monroe, NC.
Responsibilities:
- Perform mold changeovers on Kawaguchi injection molding machines. Remove and install molds, connect water lines and other required hookups, verify machine settings against the setup sheet, and run startup samples.
- Perform preventive maintenance and troubleshoot issues with machines, molds, and related equipment. Document repairs and flag issues that need additional support.
- Inspect the first parts after startup and changeovers. During production, check appearance, color, part weight, and dimensions as required for each job.
- Record inspection results, separate suspect parts, and work with operators to correct quality issues before production continues.
- Follow shop safety and lockout/tagout procedures during setup and maintenance.
Work Requirements:
- At least 2 years of related work experience in plastic injection molding setup, processing, or maintenance.
- Hands-on experience changing molds and starting up injection molding presses.
- Ability to read setup sheets, troubleshoot common molding defects, use basic measuring tools, and document results.
- Kawaguchi experience is a plus. Experience with comparable injection molding presses is welcome.
How to apply:
Reply through Craigslist with your résumé or a short summary of your experience. Include the presses you’ve worked on, your experience with mold changeovers, and the best way to reach you.
Principals only. Recruiters, please don't contact this job poster.