loading
reading
writing
saving
searching
Micromech Micro-matic surface grinder / wafering machine - $500 (Minneapolis)
31st Ave S near 26th St E
make / manufacturer:
Micromech
model name / number:
Micro-matic
QR Code Link to This Post
A small surface grinder with magnetic chuck (10" long, 5" wide) outfitted with a plexiglas shroud to contain the water spray from precision wafering.
Arbor 5/8" diameter by 2" long.
Currently mounted is a 6" diameter by 0.024" diamond wafering blade. A pair of water nozzles delivers water to each face of the blade.
Baldor inverter-rated motor on Baldor VFD, 230V 3-phase input.
Has manually disengageable (half nuts) power feed for the 12" left-to-right travel. Six inches of front-to-back travel. About 5 inches vertical travel (spindle center can be adjusted to between 2-1/2" and 7-1/4" above chuck top surface).
Sitting on a 35" by 37" pallet for easy moving.
In a commercial building in south Minneapolis (Seward). There is a forklift and a pallet jack, but loading is at grade--no loading dock.
You may come have a look almost anytime--drop a line.