Miller Syncrowave 250 AC/DC TIG/Stick welder: complete water-cooled setup with Bernard cooler, CK20 torch, Miller foot control, extra torch, leads and accessories
The Syncrowave 250 is the classic Miller transformer TIG machine. It’s very reliable and easy to service, and it runs aluminum smoothly on AC. This is a complete package that’s ready to weld. [Add how it’s been used and why you’re selling, e.g. “Used in my home shop, works as it should.”]
Welder: Miller Syncrowave 250 CC AC/DC power source
Serial No. KC289682, Stock No. 903056
Input: 200/230/460V single phase, 60 Hz (105/92/46 A, 11.4 kW). [Currently set up for 230V.]
Rated output:
200A at 28V, 60% duty cycle (NEMA Class I)
250A at 30V, 40% duty cycle (NEMA Class II)
Amperage dial up to 310A
Output selector: DCEP / AC / DCEN
Adjustable AC balance
High frequency start, with off and continuous settings
Arc control (stick)
Adjustable preflow and postflow, plus spot and crater timers
Panel or Remote 14 amperage and contactor control
Original Miller owner’s manual (OM-353G)
Water cooling system
Bernard Model V35 water cooler: 115V, 6.8A, single phase, 3-gallon reservoir
Mounted on the running gear with a cylinder chain
Jug of welding coolant included
Torches and controls
CK Worldwide CK 20 Rigid water-cooled TIG torch with leads
Heliarc air-cooled gas-valve TIG torch with leads (backup or second torch)
Miller RFC-14 foot control (14-pin)
Miller remote interconnect/extension cable bundle with 14-pin connectors, weld cables and hoses [add length if known]
Stick and ground
Bernard Shortstub electrode holder on 2/0 cable
Second electrode holder on cable with Tweco-style connector
Ground clamp with cable
Additional ground/weld leads with Dinse-style connectors
Gas
L-TEC R-50-FM-580 argon regulator/flowmeter (CGA 580), made in USA, with hose
Extras
Heavy-duty power cord with 240V plug, plus a heavy extension cable [confirm type/length]
2 welding magnets
Vulcan ArcSafe auto-darkening helmet
Miller Elite auto-darkening helmet