loading
reading
writing
saving
searching
Bartender/Solid Fiberglass / Inboard Diesel - $35,000 (McKinleyville,CA)
QR Code Link to This Post
Hull: This hull was made by Westport marine in the mid 70's. A mold made from a modified Calkins 26 ft Plywood Bartender boat. It is one of 12 boats made. Very thick bottom, . Several of these hulls ended up in the commercial fleet in Alaska. This Hull spent part of its life In Alaska as well and is equipped with support to protect Rudder and prop while beached at low tide. Beautiful and seaworthy hull. Thoroughly brought back to tip top shape since 2020. Bottom sanded, barrier coated and bottom painted. Topsides smoothed and painted with linear polyurethane Paint. Looks great and is durable. Decks done with Duracoat non – skid. New stainless steel rail around cockpit. New rub rail. New front windows.
Power: Isuzu 6bd1 Diesel, 5.7 liter, 140 hp. A workhorse powerplant used by the PNW commercial boats for decades. Extensive work during restoration to bring it into reliable working order. All gaskets, hoses, and belt replaced with new. Trans is BG velvet drive 72c 1.523:1. Morse controls/Teleflex TFXtreme 10’ Approximate value $10,000
Electronics: All new Garmin since 2021 - Chartplotter Fish Finder GPSMAP 943xsv Transducer B75M, Radar GMR Fantom 18x w/seaview 5” Mount, Auto pilot Garmin Reactor 40, Auto pilot pump Octopus OCTSA, Rudder feedback sensor Garmin GRF 10 Approximate value $8,000
Other: New Fuel tanks 2x 35 Gallon poly, New Steering, Helm pump Seastar Commercial 532028, ram Seafirst 1.5” bore 7” stroke.
WOT about 16 knots. 2200 rpm get about 14 knts. Double axel Trailer is included. Since we towed this boat down from Oregon in the fall of 2020 extensive thought, research, and planning has been put into six years of restoration. Lots of time and love has been spent bringing her back into turnkey, ready to fish condition.
Price: $35,000