loading
reading
writing
saving
searching
Utilimaster Bulkhead with Sliding Door (fits Ram Promaster) - $400 (Marietta)
condition:
like new
make / manufacturer:
Utilimaster
QR Code Link to This Post
- The brand is Utilimaster. and here is a link I found to the product page for this: https://amparts.utilimaster.com/BULKHEAD-ASSEMBLY_p_491.html
- It has some smudges and grease from whoever installed it, but other than that, it has no defects.
- Has a sliding door with a latch. The door does NOT have a key lock.
- It has a yellow handle on the right side to grab on to for getting into the van through the passenger side sliding door.
- It comes in one piece and cannot be disassembled.
- It is made from solid, relatively thick metal and is fairly heavy (at least two people are needed to move it).
Rough dimensions:
Overall height = 6' 4"
Overall width = 6' 1"
Doorway height = 6'
Doorway width = 18.5"
Installation:
- If installing a Promaster, it will require cutting the plastic trim pieces on the pillars behind the seats.
- It will also require drilling 6 holes through the floor and possibly some into the side pillars to secure it to the van.
- It comes with all of the bolts which were used to secure it in my van.
- You will likely need some sort of threaded inserts for at least the 4 side bolts.
- I will not assist with installation.
Reason for selling:
The partition came with a van I have recently purchased; however, I am doing a van conversion and do not need it.
This is PICKUP ONLY. I can assist with loading it into your vehicle but will not help with any installation.
Note: I also have the black rubber flooring mat for the rear if interested.