loading
reading
writing
saving
searching
Oscillating spindle sander and thickness plaaner - $200 (Marietta)
condition:
excellent
make / manufacturer:
See photos
QR Code Link to This Post
The best way to get in touch with me is to text only
one
three eight six
six nine 3
8_seven_8_nine
I will not respond to "Is this still available", types of messages, if you see it, it is available.
Two tools in one. base flips to use the other tool.
Wen 6552 bench top thickness planer
Key Specifications
• Motor: 120V, 60 Hz, 15-Amp
• Cutterhead Speed: 8,500 RPM
• Cuts Per Minute (CPM): 25,500 CPM
• Number of Blades: 3-blade design (carbon steel, double-edged/reversible)
• Feed Rate: 26 feet per minute (FPM)
• Maximum Workpiece Width: 13 inches
• Maximum Workpiece Thickness: 6 inches
• Maximum Depth of Cut:
• 3/32 in. for workpieces under 6 inches wide
• 1/32 in. for workpieces over 6 inches wide
• Table & Base Sizes:
• Main table size: 13-1/4 in. x 9-1/2 in.
• Extension table size: 13-1/4 in. x 7-1/2 in.
• Base size: 21-3/4 in. x 12-1/2 in.
• Dust Port Sizes: 2 in., 2-1/2 in., and 4 in. (fan-assisted)
• Weight: 66 lbs
Wen 6501 oscillating spindle sander
Key Specifications
• Motor: 1/2 HP, 3.5 Amp (120V, 60Hz AC)
• No-Load Speed: 2,000 RPM
• Oscillations: 58 OPM (Oscillations Per Minute)
• Stroke / Travel: 5/8 inch
• Maximum Workpiece Height: 3-5/8 inches
• Weight: 30 to 35 lbs (depending on the exact listing variant)
• Table Size: 15 x 11.5 inches
• Dust Port: 1.5-inch external diameter (fits standard shop vacuums)
Included Accessories
• Sanding Sleeves (80-grit): 6 sizes — 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch, 2 inch, and 3 inch
• Rubber Drums: 5 rubber sanding drums
• Table Inserts / Washers: Matching throat plates and spindle washers with onboard storage