This is a spalted maple coffee table. It started as a slab of maple. Planed repeatedly. Natural insect holes filled with epoxy. Sanded for hours using increasingly fine paper to make is smooth.
It measures 72" long (6ft) and the width varies from 15" to 19" at the widest point. The table is 2" thick. After surface prep was done, several coats of Golden Pecan stain was applied, with light sanding after the first coat. Finally, 2 coats of urethane were then applied, again with light sanding after the first coat.
Legs are black aluminum and come with both wheels and sliders for carpet. Comes with wheels mounted, but I can easily remove and put on standard round sliders if you would like.