Controller port 1 was tested with Snowboard Kids 1 and 2 for a few days before I made this listing.
Controller ports 2, 3, and 4 were tested with pokemon stadium 2 and the gb transfer pak.
Factory original jumper-pak means only the launch-day 4mb ram is available, if you want to play Majoras Mask or Donkey Kong 64 you need the ram expansion which upgrades the console to 8mb.
Bundle comes with console, power cable, red "OldSkool" brand controller, and a set of "gamebit" screwdrivers to safely open console + cartridges for cleaning. -- No AV cable, see below.
(yellow controller had an issue that needed its plug cut open.)
Large gamebit is for snes/ N64 /Gamecube consoles, and small for snes/ N64/ gbc cartridges.
Sadly no spare AV cables... I have 4 other n64's that need cleaning and testing, 3 gamecubes that need dvd drive adjustments, and a snes that needs power port replaced.
Since all use the same one AV cable, they're really cheap online both new and used.
The "OldSkool" brand red and yellow controllers were mostly used for Star Wars Episode 1 Racer, for the "RRDUAL" twin-stick control cheat to make it feel more like the arcade version. When the cheap thumbstick plastic broke, I used a hollow plastic stirring stick and a lighter to make a replacement.
If you want to use any controller-paks (rumble, gb transfer, memory pak) then I'd honestly suggest an old MadCatz controller off eBay, because the OldSkool brand pak-slots are way too loose for a good connection.