loading
reading
writing
saving
searching
Amazon Fire 7 Tablet Wall Mount - $30 (Langley)
QR Code Link to This Post
Tablet Mount Instructions
Items needed for installation:
• 4 screws to mount to wall.
• Preferred screw driver for screws being used.
• Torpedo style level.
• Desired 90-degree power cable for charging. (See Options for charging below)
• Tablet for your selected mount. (Not Included)
• 4 Plastic anchors- (Optional)
• Drill Bit sized according to your anchors. A small Phillips head screw driver can create the hole, if desired. (Optional)
Options for charging for Tablet Mount:
• https://konnected.io/products/12v-to-5v-usb-power-converter
Please note: Only use UL listed devices to charge unit. This will help prevent any issues with overheating or a fire hazard. Konnected.IO devices are UL compliant and safe for continuous load usage.
Steps for Installation:
• Identify position for your mount and the desired slide location for the tablet to be inserted into the mount.
o (Please note: Tablet mount design is to allow for proper air movement and prevent tablet overheating.)
• Hold Mount to wall and utilize a torpedo style level to ensure the unit is level.
• Once desired level and location is set, Mark holes with pencil if plastic anchors are being used. o (Please note: Plastic anchors are not needed if a sheetrock screw is used to mount unit. This will prevent any large holes, in sheetrock, if tablet is relocated or upgraded in the future.)
• Drill Holes for desired anchors, if used. And insert anchors in wall. (Optional procedure)
• Insert sheetrock screws into the anchors, or sheetrock, but DO NOT overtighten. Only snug screws down.
CASH ONLY!