Deck building clamp set — 3 Irwin Quick-Grip 36" bar clamps fitted with DeckMasterJ 806 decking adapters. These turn a regular bar clamp into a decking clamp: the thin metal tab slips into the gap between boards and the clamp pulls bowed or warped boards straight and squeezes a row of boards tight together with even spacing, holding them in place while you fasten — one person can do it alone. Works with composite, PVC, and pressure-treated decking.
DeckMasterJ recommends 3–5 clamps for a deck job (spaced 4–5 ft apart), so this 3-clamp set is a ready-to-go starter set. The 806 adapters are special-order, direct from DeckMasterJ only — you can't buy them at Lowe's or Home Depot. One adapter kit (enough for one clamp) is $40–$50 new, plus $37–$45 per clamp new — over $230 to build this set new.
Used, in good working order. Adapters are fitted to both jaws of each clamp. Clamps can still be used as regular bar clamps with the adapters on. Selling as a set only — will not split.