We have a three-zone mini-split AC consisting of a 36k BTU compressor, one 18k ceiling cassette and two 9k wall units. The brand is well-regarded with a strong warranty. The units are hung and the refrigerant lines have been laid but are not connected at either end. Nothing is hard to access. Power and drainage lines are in, except for areas which are not connected to provide space for work. All is subject to review/approval by the person doing the work from here on.
We need a certified HVAC license holder to:
1) Connect the refrigerant lines to units and compressor
2) Run and document the required vacuum tests
3) Fully charge the lines
4) Connect the existing power in to the compressor and outgoing to units
5) Run a test of the system
Note this role does not require any warranting of the overall installation or the equipment itself, just that the above list has been completed per regulations, and that it was done by a licensed contractor. You tell us what that will cost us.
Principals only. Recruiters, please don't contact this job poster.