selling a rebuilt 1965 Chevrolet small block V8 327, casting # 3903352, 4.060” cylinder bore, 3.250 stroke with final displacement 336.7 wCID, approximately 10.5:1 compression ratio for street performance or hot rod. Retro hydraulic rollerRPM range 1600-5400. Estimate HP is 360-390
Build summary
Machined at Performance connection
4.060” bore
336.7 CID final displacement
3.250 stroke / Forged crankshaft polished
Keith Black KB157 + .060 dome pistons
10.5:1 compression ratio
Speedmaster hydraulic roller cam 270/276 duration .495”/.502” lift 110 LSA
Camelback casting # 3782461 heads 2.02/1.60 valves
Comp cam 981 valve springs, comp cam retainers, resurfaced and valve job completed.
Stainless roller 1.5:1 rockers
Trick flow chromoly 5/16” pushrods
High rise dual plane intake
Double roller timing set
HEI ignition with spark plug wires
Speedmaster fuel pump 80 GPH with chromoly pump shaft.
Melling high volume oil pump with harden pump shaft
Aluminum high flow long water pump
Used Accessories include (alternator and power steering pump and pulleys
Flywheel
180 thermostat
Sold as is no warranty applied. Engine is rebuilt and has not been installed in vehicle. I currently have the engine on engine stand. Can see and hear it run.