loading
reading
writing
saving
searching
Dell OptiPlex GX260 - $40 (Speedway)
High School Rd. near Columbine
QR Code Link to This Post
Prefer contact via Signal (SeaMonkey.82)
Disk SMART details:
smartctl 7.5 2025-04-30 r5714 [i686-linux-6.18.38-0-lts] (local build)
Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MPA..MPG
Device Model: FUJITSU MPC3084AT
Serial Number: 05007718
Firmware Version: 6801
User Capacity: 8,455,200,768 bytes [8.45 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database 7.5/5706
ATA Version is: ATA-3 (minor revision not indicated)
Local Time is: Thu Jul 16 16:02:55 2026 EST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Disabled
Write cache is: Disabled
DSN feature is: Unavailable
ATA Security is: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 890) seconds.
Offline data collection
capabilities: (0x03) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
No Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0001) Saves SMART data before entering
power-saving mode.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 032 - 48545
2 Throughput_Performance P-S--- 100 100 020 - 0
3 Spin_Up_Time POS--- 095 090 025 - 3
4 Start_Stop_Count -O--C- 094 094 016 - 3356
5 Reallocated_Sector_Ct PO--CK 100 100 024 - 0
7 Seek_Error_Rate PO-R-- 100 100 020 - 2557
8 Seek_Time_Performance P-S--- 100 100 019 - 0
9 Power_On_Seconds -O--C- 053 053 020 - 7065h+33m+23s
10 Spin_Retry_Count PO--C- 100 100 020 - 1
12 Power_Cycle_Count -O--C- 083 083 020 - 2569
198 Offline_Uncorrectable PO--C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
200 Multi_Zone_Error_Rate PO-R-- 100 097 020 - 552
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
Read SMART Log Directory failed: scsi error aborted command
General Purpose Log Directory not supported
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11) not supported