Please keep in mind the only part that has to be on the desk is the base. if you were to put it on a desk will cover 18inches in length from top to bottom, and 17 1/4 inches in width from East to West So as long as the base fits, then you can use the surface level if you needed more surface space but you didn’t want to change your desk.
Lift working area about 20 inches.
We chose this desk because we had a 6 foot table that we were using, and we only wanted the standing desk for part of the table, not the entire table to rise up, so this worked perfectly because we were able to raise the desk put stuff underneath it, and then use the rest of the table.
We also had a 20x20” inch table that we put this on and use that to convert to a standing desk and put stuff underneath as storage.
The workable desk surface is 28 inches wide and then it slopes in where the top surface is 18 inches of usable space and then 15 inches at the very top the entire length of the surface is 20.5 inches of usable space and 23.5 inches from bottom not including the back but if you do include the back its 30”
It’s slightly slower on the way down than the way up.
When flat it is 27 inches from back to front. But again you only need 19 inches to place this on as the base is only 19 x 19 so you can get an extra 8” of working area if on the 19 inch table
Linak DK-6430 Nordborg KA20-C286-00 Actuator | os a linear actuator model used in height-adjustable desks, medical equipment, and other systems. This motor component is designed to provide the controlled, smooth movement needed for desks to change height