loading
reading
writing
saving
searching
Electric Pot/Trap Puller, Line Hauler, Buoys, Ropes & Accessories.
QR Code Link to This Post
Welcome to Lester's Marine Gear! We're a family-owned and operated business that takes pride in offering high-quality Crab Pots, Shrimp Pots, Crawfish Pots, Manual/Electric Pot Pullers, Davits, Motors & other Accesories made right here in the USA.
Our website sales are available 24/7.If you prefer to see our products in person, our showroom is open Tuesday to Friday from 10 am - 4 pm and Saturday 10 am - 2 pm PST.
If these hours don't work for you, we're happy to schedule an appointment after hours.
Our phone support is available from 8 am - 9 pm PST 7 days a week.
We are currently shipping our products to these states : Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Washington DC, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming.
For Product Pictures & Prices
Contact Us :
☎︎ Call 503.983.6493
🌎︎ Visit www.lesterscrabpots.com or www.lestersmarinegear.com
🔥 Lester's Sch80 ST 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece ST 12V Electric Pot Puller features a heavy-duty 1.5” Schedule 80 aluminum davit and a water-resistant 12V DC motor available in 2.0 HP or 2.5 HP. The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our 12V electric pot pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s ST 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s ST 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 225 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ All unit stands 74” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,683.00 (2.0 HP Motor Variant), (2.5 HP Motor Variant - Out of Stock)
🔥 Lester's ST 12V Electric Pot/Trap Puller Motor Package 🔥
➤ Lester's ST 12V Electric Pot Puller Motor Package is compatible with most Schedule 80 electric pot pullers on the market. It features a heavy-duty 12V DC water-resistant motor available in 2.0 HP or 2.5 HP. The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our motor package comes with two 1/4" stainless pins to attach the motor package to the davit.
➤ Lester’s ST 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s ST 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 225 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ This unit comes with a 1-year warranty.
Price: $1,325.50 (2.0 HP Motor Variant), (2.5 HP Motor Variant - Out of Stock)
🔥Lester's Sch80 RA 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece RA 12V Electric Pot Puller package features a heavy-duty 1.5” Schedule 80 aluminum davit and a water-resistant 12V DC motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our electric pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s RA 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s RA 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 225 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ All unit stands 74” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,782.00 (2.0 HP Motor Variant), $1,969.00 (2.5 HP Motor Variant)
🔥 Lester's RA 12V Electric Pot/Trap Puller Motor Package 🔥
➤ Lester's RA 12V Electric Pot Puller Motor Package is compatible with most Schedule 80 electric pot pullers on the market. It features a heavy-duty 12V DC water-resistant motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly and a 12-volt 50 amp Off/On electrical switch.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our motor package comes with two 1/4" stainless pins to attach the motor package to the davit.
➤ Lester’s RA 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s RA 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 225 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ This unit comes with a 1-year warranty.
Price: $1,424.50 (2.0 HP Motor Variant), $1,611.50 (2.5 HP Motor Variant)
🔥Lester’s Sch80 SE 12V Electric Pot/Trap Puller 🔥
➤ Lester's 3-piece SE 12V Electric Pot Puller features a heavy-duty 1.5” Schedule 80 aluminum davit and a water-resistant 12V DC motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage. It also comes with a 12-volt 50 amp Momentary Up & Down electrical switch for hands-free operation, allowing the motor to rotate either clockwise or counterclockwise.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our electric pullers come with a folbe open pulley block with a ¼” stainless-steel quick link, two ¼” stainless pins to attach the motor package to the davit and one 5/16” stainless pin to secure the davit to the mounting bracket. Delrin-sleeved gunnel and flat floor mount set are also included.
➤ Lester’s SE 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s SE 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 225 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ All unit stands 74” tall with a horizontal reach of 33”.
➤ This unit comes with a 1-year warranty.
Price: $1,941.50 (2.0 HP Motor Variant), $2,134.00 (2.5 HP Motor Variant)
🔥 Lester's SE 12V Electric Pot/Trap Motor Package 🔥
➤ Lester's SE 12V Electric Pot Puller Motor Package is compatible with most Schedule 80 electric pot pullers on the market. It features a heavy-duty 12V DC water-resistant motor available in 2.0 HP or 2.5 HP. A Rope Assist device is installed to eliminate rope slippage. It also comes with a 12-volt 50 amp Momentary Up & Down electrical switch for hands-free operation, allowing the motor to rotate either clockwise or counterclockwise.➤ The motor is sealed with oil bath roller bearings, steel and bronze alloy gears, a die-cast aluminum gearbox, and synthetic gear oil for long-lasting performance.
➤ The motor package also includes a two-piece stainless knurled sheave and aluminum hub, a Delrin rope guide v-roller assembly.
➤ This motor assembly has a 10 ft 6-gauge wire harness, an 80 amp circuit breaker and an SMH Quick Disconnect for easy setup.
➤ Our motor package comes with two 1/4" stainless pins to attach the motor package to the davit.
➤ Lester’s SE 12V 2.0 HP 90:1 unit boasts a speed of 110 feet per minute and a pulling capacity of 150 lbs.
➤ Lester’s SE 12V 2.5 HP 60:1 unit boasts a speed of 150 feet per minute and a pulling capacity of 225 lbs.
➤ Both accept line sizes from 5/16” to 1/2”.
➤ This unit comes with a 1-year warranty.
Price: $1,589.50 (2.0 HP Motor Variant), $1,776.50 (2.5 HP Motor Variant)
🔥 Two Piece Schedule 40 Recreational Pot Puller Kit 🔥
➤ This recreational pot puller is the ideal choice for all non-motorized pot pulling applications.➤ The two-piece design provides for easy transport, storage and removal off your boat or skiff.
➤ When assembled the davit is approximately 76 inches tall with a 36 inch reach and breaks down to 48 inches long for easy storage.
➤ Complete Kits Include: Two-piece schedule 40 manual davit. Aluminum gunnel and combination base floor mounts. Two stainless steel wire lock hitch pin locks (1/4” & 5/16”). Folbe open face chain link pulley block with a ¼” clevis shackle for mounting pulley to the davit. 150 lbs. pulling capacity.
Price: $373.95
🔥 Two Piece Schedule 80 Heavy Duty Pot Puller Kit 🔥
➤ The schedule 80 heavy duty two piece manual pot puller is the ideal heavier load rating choice for manually pulling pots and conversion to motorized pot pulling in the future if necessary.➤ The two-piece design provides for easy transport, storage, and removal off your boat or skiff.
➤ When assembled the davit is approximately 76 inches tall with a 36 inch reach and breaks down to 48 inches long for easy storage.
➤ Complete Kits Include: Two-piece schedule 80 manual davit. Upgraded aluminum Derlin sleeved gunnel and combination base floor mounts. Two stainless steel wire lock hitch pin locks (1/4” & 5/16”). Folbe open face swivel pulley block with a ¼” clevis shackle for mounting pulley to the davit. 200 lbs. pulling capacity.
Price: $439.95
🔥 Three Piece Schedule 80 Heavy Duty Pot Puller Kit 🔥
➤ The schedule 80 heavy duty two piece manual pot puller is the ideal heavier load rating choice for manually pulling pots and conversion to motorized pot pulling in the future if necessary.➤Three-piece design allows for a seamless transition to motorized pot pulling in the future if needed.
➤ The two-piece design provides for easy transport, storage, and removal off your boat or skiff.
➤ When assembled the davit is approximately 76 inches tall with a 36 inch reach and breaks down to 48 inches long for easy storage.
➤ Complete Kits Include: Three-piece Schedule 80 Aluminum davit. Upgraded aluminum delrin-sleeved gunnel flat floor mount set. Two 1/4” & one 5/16” stainless steel wire lock hitch pin locks. Folbe open face chain link pulley block with a ¼” clevis shackle for mounting pulley to the davit. 200 lbs. pulling capacity.
➤ To upgrade this manual puller to an electric puller, a motor package must be purchased separately from our website. Pulling capacity will vary based on the chosen motor variant.
Price: $482.90
🔥 Lesters's Ropes & Buoys 🔥
➤ 3/8" Leaded Rope - Available in 50ft ($23.10), 75ft ($34.65), 100ft ($46.20), 150ft ($69.30), 200 ft ($92.40), 250 ft ($115.50), 300 ft ($138.60).➤ 5/16" Leaded Rope - Available in 50ft ($19.80), 75ft ($29.70), 100ft ($39.60), 150ft ($59.40), 200 ft ($79.20), 250 ft ($99.00), 300 ft ($118.80).
➤ Both 3/8" & 5/16" Leaded Ropes are Available in 1800 ft. Rolls.
➤ Buoys 5 x 11 inch ($17.05)
Available in Yellow, Orange, Red/White, and White. Making it easy to find and identify where your traps are. If you also purchased a pot and rope from us and would like them rigged at no additional charge, please add free rigging to your shopping cart.
➤ Commercial Buoy 6 x 14 inch ($31.85)
Available in Yellow, Red/White, and White. Designed for both commercial and recreational use, this buoy is crafted from high-quality, compression-molded closed-cell PVC foam, making it tough, puncture-resistant, and completely water-resistant. These multi-purpose commercial-grade PVC foam buoys are excellent for fishing, crabbing etc.
☎︎ Call 503.983.6493
🌎︎ Visit www.lestersmarinegear.com
Tags: line hauler, crab pot puller, pot puller, pot hauler, shrimp pot puller, electric crab pot puller, crab davits, electric pot puller, trap pullers, ace line hauler, power hauler, crab puller, electric pot hauler, harbor freight crab pot puller, manual crab pot puller, electra dyne pot puller, crab pot hauler, scotty puller, lobster pot hauler, 12v pot hauler, crab line puller, hydraulic line hauler, lobster pot puller, commercial crab pot puller, electric line hauler, electric lobster pot hauler, prawn trap puller, scotty line puller, buoy, leaded rope, water buoy, fishing buoy, crab pot floats, yellow buoy, red and green buoys, crab floats, crab pot buoy, orange buoy, crab trap buoy, foam buoy, lobster pot buoys, life buoy, water buoy, boat buoy, ocean buoy, sea buoy, noaa buoys, marker buoy, buoys waterfront, red buoy, fl buoys, crab trap buoy, egmont key buoy