Aluminum Bow Mount for Trolling Motor. New, never used, probably manufactured by Alumacraft. There are plenty of photo's showing measurements and construction.
I don't have a boat to mount this on to show how it would appear when installed. I did have a rectangular table so imagine the end of the table is the bow of your boat. Unfortunately, the table is not angled in to replicate the bow of your boat so you have to imagine. The end of the Mount cut at an angle will be installed against the Bow's Top Rail. The Trolling Motor will enter the water toward the Port or Left Side of your boat's Bow. Most Trolling Motor installations are Port or Left Side entry installations. To secure the Mount I would use heavy duty rivets or Thru Bolts with Large Washers and Nuts located on the under side of the mounting deck.