loading
reading
writing
saving
searching
Dougstuff Stark Welding 220 Volt Spot Welder-# 55010+stand+new tips - $135 (Glenville)
QR Code Link to This Post
It was lightly used in our arts and crafts business and I found that it’s handy to be able to clamp the work together and vary the clamp force and work position before triggering the weld operation with the manual switch.
There is also a pair of new replacement electrode tips, a dressing file, and an Allen wrench for adjusting the arms and contact alignment. It has a 20 foot cord with a 220 volt 15 amp style plug (see pics for plug configuration).
Welding capacity is mild steel or stainless steel up to 1/8” in combined thickness. For galvanized steel it’s two 20 gauge sheets.
It takes up floor space about 20” wide by 30” deep and is about 48” total height. The cart was shop built and rigged so that we could clamp the electrodes to the work piece by stepping on a foot pedal and then operate the manual switch by hand. It’s a little bit jury-rigged, but it works great. I did wire up an extension lead that can be used for a remote or automatic switch, but I never needed it.
You could easily take the welder off the stand if you want it to be portable.
If you need more pictures or info let me know, I’m happy to respond.
We are located near Glenville, Pa. 17329 about 3 miles from the Glenville Post Office. If you’re not familiar with the area, for route planning purposes you can use the Glenville Post Office address on your GPS to get an idea of how far away you are and what route to take. Their address is 8142 Blooming Grove Road, Glenville, Pa. 17329.
For security reasons, I’ll give you my address and landline phone number after we confirm a date and time to meet.
Communications will have to be by email or landline phone as we do not have cell phone service in this area.
Sale is for cash - exact change - as I do not carry any money.
I'm available for pickup during daylight hours only.
Thanks