https://www.henkeenterprise.com/
$16,995 Portable Corral, Electric over Hydraulic lift for hooking and unhooking,, Electric over hydraulic lift for rear axle to pull tires off, so it can sit on the ground.
Roll out panels that are all connected.
Heavy duty built!!
In stock.
Industries America / West Valley
$16,995
-------Built for ranchers who need a real working corral that moves — rugged, fast to set up, and priced for small and mid-size operations.
Twelve 20 ft × 6 ft heavy-duty panels fold out into two heptagon pens with 2,940 sq. ft. of working area, holding 80–100 head depending on animal size. The rounded layout keeps cattle calm and moving instead of bunching in corners, so one or two people can work them without a fight.
• Gates where you need them: three 90" swing gates plus three walk-through gates and a half rear door, so you can sort and move cattle without climbing panels.
• Work one animal at a time: a dedicated single-animal pen for injections and branding, with a built-in head clamp for dehorning, tagging, and treatments.
• Stays put: ground braces anchor the panels into the earth — cattle can't tip them.
• Moves like a trailer: solid rubber wheels on every panel and a gooseneck hitch, towable at highway speeds on ST235/80R16, 10 ply tires. Panels fold flat against each other into a compact 28.6 ft transport length.
• Sets up in about 20 minutes with two people. Two front hydraulic jacks and one rear jack, all fully electric, handle the leveling.
• Built to last: rugged tubing construction, spray-coated finish, animal-safe design. Expansion panels available if you need more room later.
Specs
• Capacity: ~80–100 head (cattle, calves, yearlings)
• Panels: 12 heavy-duty, 20 ft × 6 ft, spray-coat finish
• Working area: 2,940 sq. ft., dual heptagon pens
• Gates: 3 × 90" swing, 3 walk-through, ½ rear door, head clamp gate
• Single-animal pen with head clamp
• Jacks: 2 front + 1 rear, fully electric hydraulic
• Hitch: gooseneck; wheels: ST235/80R16, 10ply, solid rubber for all panels
• Transport: 28.6 ft long × 100" high × 6 ft wide
• Setup: ~20 minutes, 2 people
• Options: expansion panels available
Montana 7992616
-(12) 20-ft rolling panels, 6 on each side.
-head catch and crowding chute.
-Electric / Hydraulic front and rear jacks for easy setup and leveling.
-16-ply tires
- 70 to 100 head cattle
The Industrias América Small Portable Corral is designed for ranchers who need a rugged, efficient, and affordable cattle handling solution. With 12 heavy-duty 20 ft × 6 ft panels, the system unfolds into two heptagon-shaped pens that together create 2,940 square feet of working area. This smart layout maximizes space while keeping cattle calm and easy to control.
Each unit includes three large 90" swing gates and three smaller walk-through gates for flexible cattle flow. A dedicated single-animal pen allows for quick injections or branding, while the built-in head clamp provides safe and secure handling for dehorning, tagging, or treatments.
For safety, the corral is equipped with ground braces that anchor into the earth, preventing cattle from tipping panels. Solid rubber wheels on all panels and a gooseneck hitch allow the system to be transported easily and towed at highway speeds. The panels fold against each other for compact transport, and the system sets up in about 20 minutes with only two people.
Powered by two front hydraulic jacks and one rear jack (fully electric), setup and leveling are simple and fast. With its rugged tubing construction, spray-coated finish, and animal-safe design, this corral offers durability and ease of use that small and mid-size producers can count on.
Application: Livestock (cattle, calves, yearlings)
Capacity: ~80–100 head (depending on animal size)
Panel Count: 12 panels (20 ft × 6 ft each, 6 ft high)
Working Area: 2,940 sq. ft. (dual heptagon layout)
Corral Layout: Two heptagon-shaped pens with central frame
Gates: 3 large swing gates (90" wide each)
3 smaller walk-through gates
½ rear door for handler access
Head clamp gate for secure handling
Single-animal pen for injections or branding
Built-in clamp for dehorning, tagging, treatments
Frame Length (transport): 28.6 ft (344")
Transport Dimensions: 28.6’ L × 100” H (at gooseneck) × 6’ W
Panel Material: Heavy-duty tubing construction
Finish: Spray coat finish for durability
Panel Wheels: Solid rubber wheels on all panels
Ground Braces: Anchors driven into soil prevent tipping
Hitch Type: Gooseneck
Tire Specs: ST235/80R16 (removable wheel system, no fixed axle)
Jacks: 2 front hydraulic jacks + 1 rear hydraulic jack (fully electric)
Mobility: Panels fold against each other; towable at highway speeds
We sell all Industries America, West Valley equipment, Ironcraft mowers what you made in the USA,
Fuel Trailer’s, Header Trailer, Tilt Deck Trailer trailers, dirt blades, box blades, bat wing mowers, three point mowers, snow pusher, three point box blades with ripper, cattle feed cake trailer, portable Cattle Chute, fixed Cattle Chute, three point blades in the list goes on!!