loading
reading
writing
saving
searching
Cooler Master Wraith Ripper Threadripper CPU Cooler (TR4/sTRX4) - $70 (Burnaby)
QR Code Link to This Post
Used on a Threadripper 2990WX (32 cores) and works great, with the fan and RGB lighting both fine. I cleaned off the old thermal paste, though a little residue is left at the edge of the base. There's also some light dust and a few smudges on the top cover, as shown in the photos.
Compatibility: made for socket TR4 (Threadripper 1000 and 2000 series). sTRX4 (TRX40, Threadripper 3000) and sWRX8 (Threadripper PRO 3000WX/5000WX) use the same mounting, so it fits those boards too. It isn't made for the newer sTR5 Threadripper 7000/9000 chips.
Mounting is very easy. Four spring-loaded screws built into the cooler go from the top straight into the Threadripper socket frame, so there's no backplate or bracket to deal with.
Specs: 150 x 132 x 160.5 mm (W x D x H), about 1.6 kg, 44 mm RAM clearance. Fan: 120 mm, 4-pin PWM, up to 2750 RPM. Lighting: SATA power plus an internal USB 9-pin header, controlled with Cooler Master's Wraith Ripper RGB software. Check that your case has room for a 160 mm tall cooler.
Included:
- Wraith Ripper cooler with its built-in fan and mounting screws
- Fan and lighting cables (attached, as shown)
Everything in the photos is what you get. No box, manual or thermal paste. You'll want fresh paste when you install it.
Pickup only at the Brentwood Mall food court (Tables) in Burnaby, by the bridge. Cash only. No shipping, no holds.
If the ad is up, it's still available. Thanks!