loading
reading
writing
saving
searching
Complete 3-Way Tri-Amped PA System. Crown K2 Rack, EV Sx300, Custom 15s and 18 - $1,600 (Brooklyn)
condition:
good
make / manufacturer:
Crown, dBX, ElectroVoice, Furman
QR Code Link to This Post
Everything works. I will set it up and let you hear it before you buy.
RACK (in a road case, wired and ready)
3x Crown K2 power amplifiers. 500W per channel at 8 ohms, 800W per channel at 4 ohms, 2,500W bridged mono at 4 ohms. Fanless, so totally silent.
dbx DriveRack 260 loudspeaker management system. Crossovers, 28 band graphic EQ, parametric EQ per output, PeakStopPlus limiters, alignment delay, RTA. Currently loaded with the system tuning.
Furman PM-8 power conditioner with line voltage and current meters.
SPEAKERS
2x Electro-Voice Sx300. 12 inch two-way, 300W continuous, 8 ohms. The Sx300 is one of EV’s longest running workhorse cabinets and remains one of the most efficient 12 inch boxes ever built at 99 dB sensitivity. These are the original USA production out of Buchanan, Michigan. EV moved manufacturing overseas in later years, and the American built cabinets still command a premium.
2x custom 15 inch cabinets
2x custom 18 inch subwoofers
The custom cabinets were built by the engineer who designed the system.
HOW IT RUNS
Tri-amped and actively crossed through the DriveRack. High and mid frequencies in stereo to the Sx300s, mid-low in stereo to the 15s, low frequency in mono to the subs.
INCLUDED
All speaker cables, signal cables and power cables. Everything needed to run sound and power to every box.
WHAT THE PIECES GO FOR SEPARATELY
Crown K2: $375 to $500 each
dbx DriveRack 260: $250 to $400
Furman PM-8: $65 to $130
EV Sx300: $200 to $350 each
Road case: $150 to $300
That is roughly $2,300 to $3,300 in used market value before counting the four custom cabinets or any of the cabling.
FAIR WARNING ON WEIGHT
The speakers are light and easy to carry. The loaded rack is close to 180 lbs. Bring a second person and a truck or van.
So sad to part with this!