Fastway (E2) Weight Distribution Hitch - FA92-00-0800 - $300
QR Code Link to This Post
Fastway Weight Distribution Hitch - FA92-00-0800
500 lbs
600 lbs
700 lbs
Fastway
WD With Sway Control
Fits 2 Inch Hitch
Allows Backing Up
Includes Shank
Reduces Sway
2-Point
Electric Brake Compatible
Surge Brake Compatible
Two points of steel-on-steel friction work to prevent and correct trailer sway in this weight distribution system. Sway control brackets help to ensure that your trailer stays in line with your tow vehicle. Adjustable shank included.
Used for one trip last year to bring my camper home. Looks brand new. 10k ball installed. Best on the market. I went to a fifth wheel. $300
Features:
Evenly distributes weight over axles of tow vehicle and trailer for stability and control
Creates a level ride for both tow vehicle and trailer
Integrated 2-Point Sway Control limits side-to-side movement
Brackets keep spring bars in place for a rigid system that holds trailer in line
Steel-on-steel friction helps to minimize sway caused by winds or sudden maneuvers
No lift chains - eliminate unwanted movement
Unique design makes system compatible with surge-type brake actuators
Trunnion spring bars flex for a controlled, even ride
No-drill, clamp-on brackets can be adjusted along the trailer frame
Accommodates frame-mounted items such as gas tanks, battery boxes, toolboxes, or generators
Desired tilt is achieved with traditional washer design
Add or remove washers from spacer rivet to tilt head up or down
Powder coated steel construction is durable and corrosion resistant
Snap-up lever eases installation by reducing lifting required by trailer jack
System includes head assembly, adjustable shank, spring bars, sway control brackets, lift handle, pin and clip, and all necessary hardware
Hitch ball sold separately - requires 1-1/4" diameter shank
1-7/8" Thin walled socket (EQ70-00-4800 - sold separately) recommended for hitch ball installation
Specs:
Tongue weight: 400 lbs - 800 lbs
Gross towing weight: 8,000 lbs
Fits: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
Sway control bracket positioning: 27" - 30" back from center of coupler
Maximum trailer frame height: 6"
Shank length:
8" From center of hitch pin hole to center of adjustment holes
9" From center of hitch pin hole to front of shank
7" From center of hitch pin hole to back of shank
12" Overall
Total height adjustment along shank: 7-1/2"
Maximum rise: 6-1/4"
Maximum drop: 1/2"
Overall height: 8-1/2"
Holes are spaced 1-1/4" apart on center
10-Year warranty