About 10yrs ago I changed careers and stuffed years of material from being an electrical contractor into my garage. I’ve spent the last week going through stuff I haven’t touched in 10yrs and decided I’d rather someone else use it than continue to collect dust. If you’re an electrical contractor, a tradesperson, or dabble in sidework, then this is a hell of a deal.
Hardware has been sorted, married down and crammed in the smallest box it would fit. Most have more than the listed number but wanted to be conservative. Nothing has been installed. All together this is well over $3500 in material, but you can have it all for $750 OBO.
6ft ladder
5ft ladder
4ft ladder
400ft cat6 wire
200amp Siemens generator ready 40sp main breaker panel
New 125amp Sq D homeline 24sp main lug
(20) 20amp homeline breakers
(20) 15amp homeline breakers
(2) 15amp homeline arc-fault breakers
30amp SqD rainproof non-fused disc sw
GreenLee poly line (pull string) +5000ft
GreenLee mule tape new3000ft & 750ft.
600ft roll of yellow poly rope
2 first aid kits
(2) exit lights
Pack of booties
(3) 10 gauge splitters
(Apx15ft) & (Apx30ft) 3/4” flex
(Apx 25ft) 1/2” liquid tite
(Apx20ft) 1” Smurf
(50) rn23 blue plastic boxes
(2) face mount allied 24cui
(1) side screw single gang
(1) side car
(1) 2gang pvc box 2x3/4holes
(20) 3/0 spreader bars
(5) 3gang blue plastic boxes
(5) single gang deep metal stack boxes
(3) single gang shallow metal stack boxes
(5) wire mold receptacle boxes
(5) bond clamps
(Apx25) 3/4” rain tight emt connectors
(2) 2” nipples 3”long, w lock and bush
(4) 3/4” LBs, short, pvc, 2 metal
(3) cord relief socks (2x1”) & (1-1/4”)
(30) 4-0 cover plates
(3) 4-11/16 cover plates
(Apx200) red butt-splices 16-22awg
(100) blue butt-splices 14-16awg
(50) yellow butt-splices 10-12awg
3ft appliance pigtail
Unopened roll tie wire
Hardware:
(Apx50) 3/8” x 3” and 5” wedge anchor
(Apx180) 1/4” x 2” wedge anchor
(x2) (Apx50) 1/4” toggle bolts
(Apx50) 3/16 toggle bolts
(Apx40) 3/4” outdoor universal one hole clmp
(Apx20) Backspaces for 3/4” straps
(6) mech splices for #6-250mcm
(4) mech splices #2-#14
(Apx 50) 1” Concrete drive anchor
(Apx20) 1-1/2” Concrete drive anchor
(Apx 30) 1/2” J-nails
(Apx 30) 3/4” J-nails
(Apx 200) 1/4-20 x3” SS security screws
(Apx100) 3/8 x 2” SS security screws
Box 100 red conical anchor kit w/ sq drive
(Apx 100) misc anchor kit w/sq drive
(Apx50) metal drywall anchors
(Apx 100) 1” sq drives
(Apx 100) 3/4” sq drives
(Apx 100) 1” SS security drives
(100+) 3/8” x1” bolts
(Apx50) 3/8” nuts, fender & lock washers
(Apx3000+/12lb) 7/16” black tek screws
(Apx250) 1/4” hex head x 3/4” self-tap
(Apx200) Philips waffle 1/2” self-tap
(Apx100) Philips waffle 1/2” pointy tap
(Mix box apx 50) 1/4-20 x1” rnd head bolts
(Apx100) 1/4-20 x 3/4” countersink bolts
(Apx50) 1/4-20 nuts
(Apx150) 1/4” flat washer
(Apx100) ground screws
(Apx200) splice caps
(Apx100) 8-32 x2” Phil-round head
(Apx100) 8-32 x1” Phil-round head
(Apx50) 8-32 x 1-1/2” SS round security
(Apx50) 8-32 x1” SS countersink
(Apx100) 6-32 x 2” Phil-round head
(Apx2000) drywall screws (mix box of course and fine thread)
Organizer mix with lag bolts, washers and square drives