...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

Skid Steer 6ft Brush Cutter Mower - $1,800 (Argonia)

‹ image 1 of 15 ›
Skid Steer 6ft Brush Cutter Mower 1
Skid Steer 6ft Brush Cutter Mower 1 thumbnailSkid Steer 6ft Brush Cutter Mower 2 thumbnailSkid Steer 6ft Brush Cutter Mower 3 thumbnailSkid Steer 6ft Brush Cutter Mower 4 thumbnailSkid Steer 6ft Brush Cutter Mower 5 thumbnailSkid Steer 6ft Brush Cutter Mower 6 thumbnailSkid Steer 6ft Brush Cutter Mower 7 thumbnailSkid Steer 6ft Brush Cutter Mower 8 thumbnailSkid Steer 6ft Brush Cutter Mower 9 thumbnailSkid Steer 6ft Brush Cutter Mower 10 thumbnailSkid Steer 6ft Brush Cutter Mower 11 thumbnailSkid Steer 6ft Brush Cutter Mower 12 thumbnailSkid Steer 6ft Brush Cutter Mower 13 thumbnailSkid Steer 6ft Brush Cutter Mower 14 thumbnailSkid Steer 6ft Brush Cutter Mower 15 thumbnail
375 North Argonia Road near 40th Ave N

google map

condition: new
make / manufacturer: AGT Mower King
model name / number: BC-13-72W
size / dimensions: 6ft

QR Code Link to This Post

New Skid Steer 6ft Brush Cutter made by AGT Mower King, model BC-13-72W. Standard flow of 14gpm to 20gpm and 3,000 max psi. Very good for cutting brush, weeds and saplings. This new skid steer brush cutter attachment comes with a 72" wide mowing deck and a cutting swath of about 68" wide and will cut up to 2" diameter saplings and bushes.

It features 2 bi-directional blades and heavy gear box. Standard 14gpm to 20gpm flow hydraulics. Comes with new hydraulic hoses with quick connect skid loader flat faced ends. Standard skid loader quick hitch.

Note: This mower is new and never had oil ran through it. Not rated for high flow machines.
This attachment has never been used or had hydraulic oil in it. Before using this attachment be sure your machine has clean and uncontaminated hydraulic oil. Make sure you operate this attachment at slow hydraulic flow or bleed the unit until the air in the lines and in the motor has been eliminated. Not doing these things may result in failure of the drive motor.

Price is $1800 firm. Weighs around 800lbs. I can load onto your truck or trailer.

Located about 40 minutes S/W of Wichita just North of Argonia, Kansas.

Thanks for looking.

post id: 7967789241

posted:

updated:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.