...
▲
favorite
favorite
hide
unhide
flag
flagged

Posted

Contact Information:

print

Skid Steer 24" Stump Grinder - $2,500 (Argonia)

‹ image 1 of 10 ›
Skid Steer 24" Stump Grinder 1
Skid Steer 24" Stump Grinder 1 thumbnailSkid Steer 24" Stump Grinder 2 thumbnailSkid Steer 24" Stump Grinder 3 thumbnailSkid Steer 24" Stump Grinder 4 thumbnailSkid Steer 24" Stump Grinder 5 thumbnailSkid Steer 24" Stump Grinder 6 thumbnailSkid Steer 24" Stump Grinder 7 thumbnailSkid Steer 24" Stump Grinder 8 thumbnailSkid Steer 24" Stump Grinder 9 thumbnailSkid Steer 24" Stump Grinder 10 thumbnail
375 North Argonia Road near 40th Ave N

google map

condition: new
make / manufacturer: Wolverine
model name / number: SG-13-08D
size / dimensions: 24"

more ads by this seller

QR Code Link to This Post

New 24” diameter stump grinder. Has hydraulic controlled swing from left to right with a 55-degree swing arch. You don't have to move the skid steer since it has the hydraulic left and right sweep. Hydraulic motor drives the 24” cutting wheel at 1100 rpm with cutting depth of 8”. The cutting wheel has 32 replaceable carbide teeth. Wolverine model SG-13-08D.

Comes with electric wiring harness and switches to operate the solenoids and an instruction manual.

Standard hydraulic flow rate of 15-26 GPM. Stump grinder weighs around 630lbs.

This attachment has never been used or had hydraulic oil in it. Before using this attachment be sure your machine has clean and uncontaminated hydraulic oil. Make sure you operate this attachment at slow hydraulic flow rate or bleed the unit until the air in the lines and in the motor has been eliminated. Not doing these things may result in failure of the drive motor.

$2,500. I can load it up for you.

Located about 40 minutes S/W of Wichita just north of Argonia, Kansas.

Thanks for looking.

post id: 7979172624

posted:

updated:

♥ best of [?]

loading
reading
writing
saving
searching

refresh the page.